PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1560H19-179
1560H19-179 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,SEAL is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, construction: SOLID, overall_height: 1.061 INCHES NOMINAL IN, seal_seat_depth: 0.998 INCHES NOMINAL IN, flange_thickness: 0.094 INCHES NOMINAL IN, style_designator: FLANGED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-600-2202, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1560H19-179
NSN: 5330-00-600-2202
FSC: 5330
CAGE: 81996 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL OVERALL
constructionSOLID
overall_height1.061 INCHES NOMINAL IN
seal_seat_depth0.998 INCHES NOMINAL IN
flange_thickness0.094 INCHES NOMINAL IN
style_designatorFLANGED
aperture_diameter4.940 INCHES NOMINAL IN
bolt_hole_diameter0.173 INCHES NOMINAL IN
bolt_hole_quantity30
seal_seat_diameter5.124 INCHES NOMINAL IN
bolt_circle_diameter6.000 INCHES NOMINAL IN
body_outside_diameter5.390 INCHES NOMINAL IN
NSN5330-00-600-2202
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1560H19-179 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: FLANGED
•
FLANGE THICKNESS: 0.094 INCHES NOMINAL IN
•
BODY OUTSIDE DIAMETER: 5.390 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 6.000 INCHES NOMINAL IN
•
SHORTEST DISTANCE BETWEEN BODY END AND MOUNTING FLANGE: 0.844 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
SEAL SEAT DEPTH: 0.998 INCHES NOMINAL IN
•
BOLT HOLE DIAMETER: 0.173 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORFLANGED
FLANGE THICKNESS0.094 INCHES NOMINAL IN
BODY OUTSIDE DIAMETER5.390 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER6.000 INCHES NOMINAL IN
SHORTEST DISTANCE BETWEEN BODY END AND MOUNTING FLANGE0.844 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SEAL SEAT DEPTH0.998 INCHES NOMINAL IN
BOLT HOLE DIAMETER0.173 INCHES NOMINAL IN
MOUNTING FLANGE DIAMETER6.375 INCHES NOMINAL IN
BOLT HOLE QUANTITY30
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
H8629PC33Interchangeable
interchangeable cross-reference
interchangeable
NT4054PC3Interchangeable
interchangeable cross-reference
interchangeable
180004Interchangeable
interchangeable cross-reference
interchangeable
BP3664Interchangeable
interchangeable cross-reference
interchangeable
A-1040Interchangeable
interchangeable cross-reference
interchangeable
100525-001000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1560H19-179?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1560H19-179?
1560H19-179 is a RETAINER,SEAL.
What parts can replace 1560H19-179?
There are 9 known substitutes for 1560H19-179: H8629PC33, NT4054PC3, 180004 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1560H19-179?
1560H19-179 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-600-2202. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1560H19-179

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026