PartsTable
Technical Data Sheet
Download PDF

156016D42 — BEARING,ROLLER,TAPERED

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

156016D42: BEARING,ROLLER,TAPERED.

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 1.3125 INCHES NOMINAL IN, cone_width: 1.8125 INCHES NOMINAL IN, bore_diameter: 6.5000 INCHES NOMINAL IN, overall_width: 1.8125 INCHES NOMINAL IN, standout_width: 0.5000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-5515, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
156016D42
NSN: 3110-00-100-5515
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 05340 — LIDGERWOOD MANUFACTURING COMPANY DBA LIDGERWOOD MANUFACTURING CO DIV LIDGERWOOD MANUFACURING CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width1.3125 INCHES NOMINAL IN
cone_width1.8125 INCHES NOMINAL IN
bore_diameter6.5000 INCHES NOMINAL IN
overall_width1.8125 INCHES NOMINAL IN
standout_width0.5000 INCHES NOMINAL IN
style_designatorSTRAIGHT BORE, NORMAL ANGLE
cone_corner_radius0.1870 INCHES NOMINAL IN
backface_corner_radius0.1250 INCHES NOMINAL IN
overall_outside_diameter10.0000 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-5515
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 156016D42 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUP WIDTH: 1.3125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
•
OVERALL OUTSIDE DIAMETER: 10.0000 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.1870 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.5000 INCHES NOMINAL IN
•
CONE WIDTH: 1.8125 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
CUP WIDTH1.3125 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
OVERALL WIDTH1.8125 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER10.0000 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
CONE CORNER RADIUS0.1870 INCHES NOMINAL IN
STANDOUT WIDTH0.5000 INCHES NOMINAL IN
CONE WIDTH1.8125 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER6.5000 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 7
60067HPC87Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
86100-86650Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
86650-86100Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
6013136Reference document
Same NSN cross-reference
Reference document — Secondary reference
AS11-1701-543PC87Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1267Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 156016D42?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 156016D42?
156016D42 is a BEARING,ROLLER,TAPERED.
What parts can replace 156016D42?
There are 7 known substitutes for 156016D42: 60067HPC87, 86100-86650, 86650-86100 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 156016D42?
156016D42 is cataloged in the U.S. Government catalog under NSN 3110-00-100-5515. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 156016D42

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.