PartsTable TECHNICAL DATA SHEET
NSN 1560-01-476-1373Government record, cited

Driveshaft Assembly, Blower Drive1560-01-476-1373

NSN 1560-01-476-1373 · NIIN 014761373 · Part number SKCP2894-1
Kamatics Corporation · FSC 1560 — Airframe Structural Components · FSG 15 — Aircraft and Airframe Components · CAGE 50632
Government record, cited
NSN 1560-01-476-1373 — this item is cataloged by the U.S. Government under National Stock Number 1560-01-476-1373. Manufacturer of record part number: SKCP2894-1.
Also searched as  1560-01-476-1373 · 1560014761373 · NIIN 014761373 · 01-476-1373 · FSC 1560 Airframe Structural Components · CAGE 50632 · SKCP2894-1 · 1560PL1429545 · K874405-001
Nearby stock numbers  ·
Features
  • Driveshaft Assembly,blower Drive — FSC 1560
  • Overall Diameter: 5.000 INCHES NOMINAL IN
  • 1 manufacturer part number on file
  • Manufacturer of record: Kamatics Corporation
Identification
  • NSN: 1560-01-476-1373
  • NIIN: 014761373
  • FSC: 1560 — Airframe Structural Components
  • FSG: 15 — Aircraft and Airframe Components
  • Primary part number: SKCP2894-1
  • Manufacturer: Kamatics Corporation
General Description

The Driveshaft Assembly,blower Drive, cataloged under National Stock Number 1560-01-476-1373, is classified within Federal Supply Class 1560 (Airframe Structural Components) of the Aircraft and Airframe Components group. The manufacturer of record is Kamatics Corporation. Government technical data includes 1 specification, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN1560-01-476-1373
Primary Part NumberSKCP2894-1
Item NameDriveshaft Assembly,blower Drive
FSC / FSG1560 / 15 — Airframe Structural Components
ManufacturerKamatics Corporation
StatusACTIVE
Overall Diameter5.000 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL Q — CCL Item — Commerce Control List
HazardPossible hazard — SDS may be required (DLA HMIC P)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
SKCP2894-1 PRIMARY Kamatics Corporation (USA)
Reference documents
ReferenceMeaning
1560PL1429545 6/9 Informative reference only
Jednolity Indeks Materialowy - Uniform Material Index
K874405-001 1/2 Source control — Government-approved source
U.S. Government activity
No interchangeability data on file.
Other items in FSC 1560 — Airframe Structural Components
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
1560-00-000-0047
MODIFICATION KIT,AIRFRAME
1560-00-001-1849
GYRO BOX ASSEMBLY
1560-00-001-1850
RADOME
1560-00-001-1851
RADOME
1560-00-001-2368
PLATE,STRUCTURAL,AIRCRAFT
1560-00-001-2478
HINGE,LEADING EDGE
1560-00-001-2479
HINGE,LEADING EDGE
1560-00-001-2480
HINGE,LEADING EDGE

Frequently Asked Questions

What is NSN 1560-01-476-1373?

NSN 1560-01-476-1373 is a Driveshaft Assembly,blower Drive, manufactured by Kamatics Corporation, classified under FSC 1560, Airframe Structural Components. Status: active.

What part numbers are listed for NSN 1560-01-476-1373?

NSN 1560-01-476-1373 has 1 manufacturer part number on file: SKCP2894-1 (Kamatics Corporation).

What are the specifications of SKCP2894-1?

Key specifications for SKCP2894-1: Overall Diameter: 5.000 INCHES NOMINAL IN; Overall Length: 30.880 INCHES MINIMUM AND 30.980 INCHES MAXIMUM IN; Special Features: NHA PN K874400; NORMAL OPERATING SPEED 6360 RPM; MAX OPERATING TORQUE 110 IN LBS; MISALIGNMENT ANGLE 1.8 CONTINUOUS BOTH ENDS; ULTIMATE TORQUE CAPACITY 330 IN LBS; AXIAL STIFFNESS 210-370 LBS/IN; BENDING STIFFNESS 9.2-18.5 IN LB/DEG EACH END; DYNAMIC BALANCE DRIVESHAFT ASSY TO BE WITHIN 0.08 OZ IN LBS; End Item Identification: SH-2G G. 1 specification is documented in the U.S. Government catalog.

Is NSN 1560-01-476-1373 hazardous material?

Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.

What is the DEMIL code for NSN 1560-01-476-1373?

NSN 1560-01-476-1373 has DEMIL Code Q. Demilitarization may be required before disposal or transfer to non-military entities.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com