PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 156/35

156/35 — Technical Data Sheet

✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, head_style: KNURLED NO. 1, special_features: ACCUMOLD BIANCHI BELT KEEPER 7406; SNAP CLOSURE, thread_direction: RIGHT-HAND, end_item_identification: KEYSEATING MACHINE, nominal_thread_diameter: 0.750 INCHES IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0206, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
156/35
NSN: 3110-00-100-0206
FSC: 3110
CAGE: 65282 — WHITE MOTOR CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleKNURLED NO. 1
special_featuresACCUMOLD BIANCHI BELT KEEPER 7406; SNAP CLOSURE
thread_directionRIGHT-HAND
end_item_identificationKEYSEATING MACHINE
nominal_thread_diameter0.750 INCHES IN
thread_quantity_per_inch10
thread_series_designatorACME
part_name_assigned_by_controlling_agencyVERTICAL ADJUSTING LEAD SCREW
NSN3110-00-100-0206
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 156/35 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 0.0312 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE WIDTH: 0.8820 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
BORE DIAMETER: 1.3779 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS0.0312 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE WIDTH0.8820 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
BORE DIAMETER1.3779 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
339Interchangeable
interchangeable cross-reference
interchangeable
10-028Interchangeable
interchangeable cross-reference
interchangeable
7744Interchangeable
interchangeable cross-reference
interchangeable
442Interchangeable
interchangeable cross-reference
interchangeable
11739009Interchangeable
interchangeable cross-reference
interchangeable
7E13Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 156/35?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 156/35?
156/35 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 156/35?
There are 26 known substitutes for 156/35: 339, 10-028, 7744 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 156/35?
156/35 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0206. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 156/35

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026