PartsTable
Technical Data Sheet
Download PDF

1559M33P23 — BUSHING,SLEEVE

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

1559M33P23: BUSHING,SLEEVE.

The BUSHING,SLEEVE is a the manufacturer industrial component. Key specifications include overall_length: 0.3890 INCHES NOMINAL IN, surface_finish: 125.0 MICROINCHES OVERALL, special_features: FLANGE IS SQUARE, 0.5370 IN. X 0.5370 IN.; HAS GROOVE ON SIDE IN, body_inside_diameter: 0.2978 INCHES MINIMUM AND 0.2990 INCHES MAXIMUM IN, body_outside_diameter: 0.3990 INCHES MINIMUM AND 0.4010 INCHES MAXIMUM IN, end_item_identification: VANE-COMPRESSOR STATOR;F108-CF-100.

This part is cataloged in the U.S. Government catalog under NSN 3120-01-499-4160, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1559M33P23
NSN: 3120-01-499-4160
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 58828 — CFM INTERNATIONAL INC DBA CFM INTERNATIONAL (USA)
SPECIFICATIONS
overall_length0.3890 INCHES NOMINAL IN
surface_finish125.0 MICROINCHES OVERALL
special_featuresFLANGE IS SQUARE, 0.5370 IN. X 0.5370 IN.; HAS GROOVE ON SIDE IN
body_inside_diameter0.2978 INCHES MINIMUM AND 0.2990 INCHES MAXIMUM IN
body_outside_diameter0.3990 INCHES MINIMUM AND 0.4010 INCHES MAXIMUM IN
end_item_identificationVANE-COMPRESSOR STATOR;F108-CF-100
NSN3120-01-499-4160
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 1559M33P23 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 125.0 MICROINCHES OVERALL
•
BODY OUTSIDE DIAMETER: 0.3990 INCHES MINIMUM AND 0.4010 INCHES MAXIMUM IN
•
BODY INSIDE DIAMETER: 0.2978 INCHES MINIMUM AND 0.2990 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH125.0 MICROINCHES OVERALL
BODY OUTSIDE DIAMETER0.3990 INCHES MINIMUM AND 0.4010 INCHES MAXIMUM IN
OVERALL LENGTH0.3890 INCHES NOMINAL IN
BODY INSIDE DIAMETER0.2978 INCHES MINIMUM AND 0.2990 INCHES MAXIMUM IN
SPECIAL FEATURESFLANGE IS SQUARE, 0.5370 IN. X 0.5370 IN.; HAS GROOVE ON SIDE IN
END ITEM IDENTIFICATIONVANE-COMPRESSOR STATOR;F108-CF-100
SUBSTITUTES & CROSS-REFERENCES 1
1559M33Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1559M33P23?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1559M33P23?
1559M33P23 is a BUSHING,SLEEVE.
What parts can replace 1559M33P23?
There is 1 known substitute for 1559M33P23: 1559M33. Substitute compatibility should be verified for your specific system.
What is the NSN for 1559M33P23?
1559M33P23 is cataloged in the U.S. Government catalog under NSN 3120-01-499-4160. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1559M33P23