PartsTable
Technical Data Sheet
Download PDF

15594AG — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

15594AG: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hole_diameter: 0.120 INCHES MINIMUM AND 0.135 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.270 INCHES MINIMUM AND 1.285 INCHES MAXIMUM IN, overall_length: 1.270 INCHES MINIMUM AND 1.285 INCHES MAXIMUM IN, hardness_rating: 75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM OVERALL, style_designator: NON-CIRCULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-054-4511, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
15594AG
NSN: 5330-01-054-4511
FSC: 5330 — Packing and Gasket Materials
CAGE: 73760 — ITT AEROSPACE CONTROLS LLC DBA ITT AEROSPACE CONTROLS UNIT S (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hole_diameter0.120 INCHES MINIMUM AND 0.135 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.270 INCHES MINIMUM AND 1.285 INCHES MAXIMUM IN
overall_length1.270 INCHES MINIMUM AND 1.285 INCHES MAXIMUM IN
hardness_rating75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM OVERALL
style_designatorNON-CIRCULAR
aperture_diameter1.017 INCHES MINIMUM AND 1.047 INCHES MAXIMUM IN
bolt_hole_quantity4
outside_corner_radius0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
cross-sectional_thickness0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationE515-8 FSCM 83259 OR PR+5607-80 FSCM 77308 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-054-4511
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 15594AG MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM OVERALL
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: E515-8 FSCM 83259 OR PR+5607-80 FSCM 77308 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 1.017 INCHES MINIMUM AND 1.047 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A MINIMUM AND 85.0 SHORE DUROMETER A MAXIMUM OVERALL
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONE515-8 FSCM 83259 OR PR+5607-80 FSCM 77308 MFR REF SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH1.270 INCHES MINIMUM AND 1.285 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH1.270 INCHES MINIMUM AND 1.285 INCHES MAXIMUM IN
APERTURE DIAMETER1.017 INCHES MINIMUM AND 1.047 INCHES MAXIMUM IN
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH0.974 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 15594AG?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15594AG?
15594AG is a GASKET.
What is the NSN for 15594AG?
15594AG is cataloged in the U.S. Government catalog under NSN 5330-01-054-4511. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15594AG

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.