PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 155499D180
155499D180 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: LEATHER SEALING ELEMENT, case_style: SQUARE, seal_width: 0.438 INCHES NOMINAL IN, housing_bore_diameter: 2.062 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-178-4739, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
155499D180
NSN: 5330-00-178-4739
FSC: 5330
CAGE: 05340 — LIDGERWOOD MANUFACTURING COMPANY DBA LIDGERWOOD MANUFACTURING CO DIV LIDGERWOOD MANUFACURING CO (USA)
SPECIFICATIONS
materialLEATHER SEALING ELEMENT
case_styleSQUARE
seal_width0.438 INCHES NOMINAL IN
housing_bore_diameter2.062 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.250 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-178-4739
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 155499D180 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.250 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
MATERIAL: STEEL CASE
•
SEAL WIDTH: 0.438 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 2.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.250 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
MATERIALSTEEL CASE
MATERIALLEATHER SEALING ELEMENT
SEAL WIDTH0.438 INCHES NOMINAL IN
HOUSING BORE DIAMETER2.062 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
GGG-D-751Interchangeable
interchangeable cross-reference
interchangeable
GGG-D-751 TYBCL1Interchangeable
interchangeable cross-reference
interchangeable
B94.11MInterchangeable
interchangeable cross-reference
interchangeable
K8477045REV3FIG5Interchangeable
interchangeable cross-reference
interchangeable
1000H3ALT3Interchangeable
interchangeable cross-reference
interchangeable
6RS14K1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 155499D180?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 155499D180?
155499D180 is a SEAL,PLAIN ENCASED.
What parts can replace 155499D180?
There are 17 known substitutes for 155499D180: GGG-D-751, GGG-D-751 TYBCL1, B94.11M and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 155499D180?
155499D180 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-178-4739. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 155499D180

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026