PartsTable
Technical Data Sheet
Download PDF

15520F — DIE,CRIMPING TOOL

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

15520F: DIE,CRIMPING TOOL.

The DIE,CRIMPING TOOL is a the manufacturer industrial component. Key specifications include special_features: ENDITEM IS A CRIMPING HEAD TOOL,ITEM USED ON 8AWG COPPER WIRE AND 10AWG ALUMINUM/COPPER WIRE COLOR CODE:RED, part_name_assigned_by_controlling_agency: FULL HEX DIE CODE 2. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-111-2792, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
15520F
NSN: 5310-01-111-2792
NIINs: 011112792, 016596698
FSC: 5310 — Nuts and Washers
CAGE: 75Q65 — OSHKOSH DEFENSE LLC (USA)
SPECIFICATIONS
special_featuresENDITEM IS A CRIMPING HEAD TOOL,ITEM USED ON 8AWG COPPER WIRE AND 10AWG ALUMINUM/COPPER WIRE COLOR CODE:RED
part_name_assigned_by_controlling_agencyFULL HEX DIE CODE 2
NSN5310-01-111-2792
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 15520F · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 2.250 INCHES NOMINAL IN
•
HARDNESS RATING: 55.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
FEATURES PROVIDED: CASEHARDENED
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL COMP 1020 OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 1.520 INCHES MINIMUM AND 1.525 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER2.250 INCHES NOMINAL IN
HARDNESS RATING55.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
FEATURES PROVIDEDCASEHARDENED
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL COMP 1020 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER1.520 INCHES MINIMUM AND 1.525 INCHES MAXIMUM IN
THICKNESS0.183 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
15520FXReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 15520F?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15520F?
15520F is a DIE,CRIMPING TOOL.
What parts can replace 15520F?
There is 1 known substitute for 15520F: 15520FX. Substitute compatibility should be verified for your specific system.
What is the NSN for 15520F?
15520F is cataloged in the U.S. Government catalog under NSN 5310-01-111-2792. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15520F