PartsTable
Technical Data Sheet
1551AS125-14 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, center_hole_diameter: 1.104 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN, departure_from_cited_document: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D, criticality_code_justification: ZZZW. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-372-2824, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1551AS125-14
NSN: 5331-01-372-2824
FSC: 5331 — O-RING
CAGE: 30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
center_hole_diameter1.104 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
departure_from_cited_documentCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justificationZZZW
NSN5331-01-372-2824
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1551AS125-14 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
CENTER HOLE DIAMETER: 1.104 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATION: ZZZW
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER FLUOROCARBON CLASS FPM
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
CENTER HOLE DIAMETER1.104 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONZZZW
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
AS568-024Interchangeable
interchangeable cross-reference
interchangeable
AMS 7276Interchangeable
interchangeable cross-reference
interchangeable
M83248/1-024CPInterchangeable
Same NIIN cross-reference
interchangeable
MIL-R-83248/1-024Interchangeable
Same NIIN cross-reference
interchangeable
MIL-R-83248/1Interchangeable
Same NIIN cross-reference
interchangeable
V3D10380 ITEM 7Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1551AS125-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1551AS125-14?
1551AS125-14 is a O-RING.
What parts can replace 1551AS125-14?
There are 9 known substitutes for 1551AS125-14: AS568-024, AMS 7276, M83248/1-024CP and 6 more. Substitute compatibility should be verified for your specific system.
Is 1551AS125-14 still available?
1551AS125-14 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1551AS125-14