PartsTable
Technical Data Sheet

154M870012/1 — BRACKET,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

154M870012/1: BRACKET,MOUNTING.

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include overall_width: 47.0 MILLIMETERS NOMINAL MM, overall_height: 85.0 MILLIMETERS NOMINAL MM, overall_length: 121.0 MILLIMETERS NOMINAL MM, mounting_hole_type: PLAIN, mounting_hole_diameter: 5.5 MILLIMETERS NOMINAL MM. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-435-3190, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
154M870012/1
NSN: 5340-01-435-3190
FSC: 5340 — Hardware, Commercial
CAGE: 4Y355 — STEYR-DAIMLER PUCH AG (AUT)
SPECIFICATIONS
overall_width47.0 MILLIMETERS NOMINAL MM
overall_height85.0 MILLIMETERS NOMINAL MM
overall_length121.0 MILLIMETERS NOMINAL MM
mounting_hole_typePLAIN
mounting_hole_diameter5.5 MILLIMETERS NOMINAL MM
mounting_hole_quantity4
NSN5340-01-435-3190
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 154M870012/1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 4
•
MOUNTING HOLE DIAMETER: 5.5 MILLIMETERS NOMINAL MM
•
MOUNTING HOLE TYPE: PLAIN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY4
OVERALL HEIGHT85.0 MILLIMETERS NOMINAL MM
MOUNTING HOLE DIAMETER5.5 MILLIMETERS NOMINAL MM
OVERALL LENGTH121.0 MILLIMETERS NOMINAL MM
OVERALL WIDTH47.0 MILLIMETERS NOMINAL MM
MOUNTING HOLE TYPEPLAIN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
12420488Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 154M870012/1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 154M870012/1?
154M870012/1 is a BRACKET,MOUNTING.
What parts can replace 154M870012/1?
There is 1 known substitute for 154M870012/1: 12420488. Substitute compatibility should be verified for your specific system.
What is the NSN for 154M870012/1?
154M870012/1 is cataloged in the U.S. Government catalog under NSN 5340-01-435-3190. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 154M870012/1