PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1549704-15
1549704-15 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC VINYL, design_type: FRICTION, overall_diameter: 0.610 INCHES NOMINAL IN, inside_diameter_length: 0.625 INCHES NOMINAL IN, round_cap_outside_surface_condition: SMOOTH, tube_outside_diameter_for_which_designed: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-373-0124, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1549704-15
NSN: 5340-00-373-0124
FSC: 5340
CAGE: 83298 — ALLIED SIGNAL INC AEROSPACE EQUIPMENT SYSTEMS EATONTOWN SITE (USA)
SPECIFICATIONS
materialPLASTIC VINYL
design_typeFRICTION
overall_diameter0.610 INCHES NOMINAL IN
inside_diameter_length0.625 INCHES NOMINAL IN
round_cap_outside_surface_conditionSMOOTH
tube_outside_diameter_for_which_designed0.500 INCHES NOMINAL IN
NSN5340-00-373-0124
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1549704-15 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
•
OVERALL DIAMETER: 0.610 INCHES NOMINAL IN
•
MATERIAL: PLASTIC VINYL
•
INSIDE DIAMETER LENGTH: 0.625 INCHES NOMINAL IN
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.500 INCHES NOMINAL IN
•
DESIGN TYPE: FRICTION
TECHNICAL CHARACTERISTICS (FLIS)
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
OVERALL DIAMETER0.610 INCHES NOMINAL IN
MATERIALPLASTIC VINYL
INSIDE DIAMETER LENGTH0.625 INCHES NOMINAL IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.500 INCHES NOMINAL IN
DESIGN TYPEFRICTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
050010Interchangeable
interchangeable cross-reference
interchangeable
315972Interchangeable
interchangeable cross-reference
interchangeable
RCR07G223JSInterchangeable
interchangeable cross-reference
interchangeable
050/010Interchangeable
interchangeable cross-reference
interchangeable
A21213Interchangeable
interchangeable cross-reference
interchangeable
P-8-7355Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1549704-15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1549704-15?
1549704-15 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 1549704-15?
There are 15 known substitutes for 1549704-15: 050010, 315972, RCR07G223JS and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1549704-15?
1549704-15 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-373-0124. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1549704-15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026