1549430: CLAMP,BLOCK.
The CLAMP,BLOCK is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1020, block_height: 0.484 INCHES NOMINAL IN, special_features: SUBSTITUTE MATERIAL = OD 8853 TYPE A GR II OR QQ-S-633 C1020, style_designator: RECTANGULAR, surface_treatment: PHOSPHATE ZINC, part_name_assigned_by_controlling_agency: CLAMP HALF, TUBE. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-594-5686, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL COMP 1020 |
| block_height | 0.484 INCHES NOMINAL IN |
| special_features | SUBSTITUTE MATERIAL = OD 8853 TYPE A GR II OR QQ-S-633 C1020 |
| style_designator | RECTANGULAR |
| surface_treatment | PHOSPHATE ZINC |
| special_test_features | APPLY PROTECTIVE COATING MIL-P-16232 TYPE M CLASS 1 & FINISH COAT ALL SURFACES WITH DRYING TYPE PRESERVATIVE OIL CONFORMING TO DWG 1603000 SO THAT SURFACES SHALL SUSTAIN A 4HR SALT SPRAY TEST |
| part_name_assigned_by_controlling_agency | CLAMP HALF, TUBE |
| surface_treatment_document_and_classification | MIL-P-16232 TYPE M CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| distance_from_center_of_mounting_hole_to_edge_along_the_width | 0.250 INCHES NOMINAL IN |
| center_to_center_distance_between_first_and_sixth_clamping_holes | 3.312 INCHES NOMINAL IN |
| center_to_center_distance_between_first_and_third_mounting_holes | 3.938 INCHES NOMINAL IN |
| NSN | 5340-01-594-5686 |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-16232 TYPE M CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| BLOCK HEIGHT | 0.484 INCHES NOMINAL IN |
| SPECIAL TEST FEATURES | APPLY PROTECTIVE COATING MIL-P-16232 TYPE M CLASS 1 & FINISH COAT ALL SURFACES WITH DRYING TYPE PRESERVATIVE OIL CONFORMING TO DWG 1603000 SO THAT SURFACES SHALL SUSTAIN A 4HR SALT SPRAY TEST |
| STYLE DESIGNATOR | RECTANGULAR |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD MOUNTING HOLES | 3.938 INCHES NOMINAL IN |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND SIXTH CLAMPING HOLES | 3.312 INCHES NOMINAL IN |
| DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.250 INCHES NOMINAL IN |
| SPECIAL FEATURES | SUBSTITUTE MATERIAL = OD 8853 TYPE A GR II OR QQ-S-633 C1020 |
| SURFACE TREATMENT | PHOSPHATE ZINC |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | CLAMP HALF, TUBE |
No substitute or cross-reference records for this part.