PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 154935H1
154935H1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT A, case_style: SQUARE, seal_width: 0.438 INCHES NOMINAL IN, temp_rating: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, outside_diameter: 3.756 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-849-0987, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
154935H1
NSN: 5330-00-849-0987
FSC: 5330
CAGE: 29510 — KOMATSU AMERICAN INTL CO (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT A
case_styleSQUARE
seal_width0.438 INCHES NOMINAL IN
temp_rating-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
outside_diameter3.756 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter3.751 INCHES NOMINAL IN
sealing_element_styleANGULAR-OPPOSED
accommodated_shaft_diameter2.750 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3600 FEET PER MINUTE FT
NSN5330-00-849-0987
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 154935H1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.438 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR-OPPOSED
•
OUTSIDE DIAMETER: 3.756 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 3.751 INCHES NOMINAL IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
•
SURFACE TREATMENT: PLASTIC CASE
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT B
TECHNICAL CHARACTERISTICS (FLIS)
SEAL WIDTH0.438 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR-OPPOSED
OUTSIDE DIAMETER3.756 INCHES NOMINAL IN
HOUSING BORE DIAMETER3.751 INCHES NOMINAL IN
TEMP RATING-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
SURFACE TREATMENTPLASTIC CASE
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT B
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT A
ACCOMMODATED SHAFT DIAMETER2.750 INCHES NOMINAL IN
CASE STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
1303596Interchangeable
interchangeable cross-reference
interchangeable
DOUBLE BUBBLEInterchangeable
interchangeable cross-reference
interchangeable
04001Interchangeable
interchangeable cross-reference
interchangeable
NC805PC52Interchangeable
interchangeable cross-reference
interchangeable
NC1901PC52Interchangeable
interchangeable cross-reference
interchangeable
27273Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 154935H1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 154935H1?
154935H1 is a SEAL,PLAIN ENCASED.
What parts can replace 154935H1?
There are 23 known substitutes for 154935H1: 1303596, DOUBLE BUBBLE, 04001 and 20 more. Substitute compatibility should be verified for your specific system.
Is 154935H1 still available?
154935H1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 154935H1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026