1549305: CLAMP,LOOP.
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1020 OVERALL, overall_width: 0.750 INCHES NOMINAL IN, overall_length: 6.437 INCHES NOMINAL IN, special_test_features: SPECIAL MARKINGS = STEEL STAMP 10001-1549305 IN 1/8 CHARACTERS IN, supplementary_features: SUBSTITUTE MATERIAL = OD 8853 TYPE A GR II OR QQ-S-633 C1020, part_name_assigned_by_controlling_agency: CLAMP HALF, PIPE. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-594-8684, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL COMP 1020 OVERALL |
| overall_width | 0.750 INCHES NOMINAL IN |
| overall_length | 6.437 INCHES NOMINAL IN |
| special_features | FINISH COAT ALL SURFACES WITH DRYING TYPE PRESERVATIVE OIL CONFORMING TO DWG 1603000 SO THAT SURFACES SHALL SUSTAIN A 48HR SALT SPRAY TEST |
| special_test_features | SPECIAL MARKINGS = STEEL STAMP 10001-1549305 IN 1/8 CHARACTERS IN |
| supplementary_features | SUBSTITUTE MATERIAL = OD 8853 TYPE A GR II OR QQ-S-633 C1020 |
| part_name_assigned_by_controlling_agency | CLAMP HALF, PIPE |
| surface_treatment_document_and_classification | MIL-P-16232 TYPE M CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| center_to_center_distance_between_first_and_second_holes | 2.968 INCHES NOMINAL IN |
| NSN | 5340-01-594-8684 |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-16232 TYPE M CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SPECIAL TEST FEATURES | SPECIAL MARKINGS = STEEL STAMP 10001-1549305 IN 1/8 CHARACTERS IN |
| SUPPLEMENTARY FEATURES | SUBSTITUTE MATERIAL = OD 8853 TYPE A GR II OR QQ-S-633 C1020 |
| OVERALL LENGTH | 6.437 INCHES NOMINAL IN |
| OVERALL WIDTH | 0.750 INCHES NOMINAL IN |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES | 2.968 INCHES NOMINAL IN |
| SPECIAL FEATURES | FINISH COAT ALL SURFACES WITH DRYING TYPE PRESERVATIVE OIL CONFORMING TO DWG 1603000 SO THAT SURFACES SHALL SUSTAIN A 48HR SALT SPRAY TEST |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | CLAMP HALF, PIPE |
| MATERIAL | STEEL COMP 1020 OVERALL |
No substitute or cross-reference records for this part.