1549304: CLAMP,LOOP.
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1020 OVERALL, overall_width: 0.875 INCHES NOMINAL IN, overall_length: 4.937 INCHES NOMINAL IN, surface_treatment: PHOSPHATE ZINC OVERALL, special_test_features: SPECIAL MARKINGS = STEEL STAMP 10001-1549304 IN 1/8 CHARACTERS IN, supplementary_features: ALTERNATIVE MATERIALS = OD 8853 TYPA A GR II AND QQ-5-633 C1020. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-594-8683, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL COMP 1020 OVERALL |
| overall_width | 0.875 INCHES NOMINAL IN |
| overall_length | 4.937 INCHES NOMINAL IN |
| special_features | FINISH COAT ALL SURFACES WITH DRYING TYPE PRESERVATIVE OIL CONFORMING TO DWG 1603000 SO THAT SURFACES SHALL SUSTAIN A 48HR SALT SPRAY TEST |
| surface_treatment | PHOSPHATE ZINC OVERALL |
| special_test_features | SPECIAL MARKINGS = STEEL STAMP 10001-1549304 IN 1/8 CHARACTERS IN |
| supplementary_features | ALTERNATIVE MATERIALS = OD 8853 TYPA A GR II AND QQ-5-633 C1020 |
| part_name_assigned_by_controlling_agency | CLAMP HALF, PIPE |
| distance_from_loop_center_to_short_tongue_end | 2.593 INCHES NOMINAL IN |
| surface_treatment_document_and_classification | MIL-P-16232 TYPE M CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| center_to_center_distance_between_first_and_second_holes | 4.937 INCHES NOMINAL IN |
| NSN | 5340-01-594-8683 |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-16232 TYPE M CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SPECIAL TEST FEATURES | SPECIAL MARKINGS = STEEL STAMP 10001-1549304 IN 1/8 CHARACTERS IN |
| SUPPLEMENTARY FEATURES | ALTERNATIVE MATERIALS = OD 8853 TYPA A GR II AND QQ-5-633 C1020 |
| OVERALL LENGTH | 4.937 INCHES NOMINAL IN |
| OVERALL WIDTH | 0.875 INCHES NOMINAL IN |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES | 4.937 INCHES NOMINAL IN |
| SPECIAL FEATURES | FINISH COAT ALL SURFACES WITH DRYING TYPE PRESERVATIVE OIL CONFORMING TO DWG 1603000 SO THAT SURFACES SHALL SUSTAIN A 48HR SALT SPRAY TEST |
| SURFACE TREATMENT | PHOSPHATE ZINC OVERALL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | CLAMP HALF, PIPE |
| MATERIAL | STEEL COMP 1020 OVERALL |
No substitute or cross-reference records for this part.