PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 15465-6D

15465-6D — Technical Data Sheet

✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,KEY is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hole_diameter: 2.234 INCHES MINIMUM AND 2.266 INCHES MAXIMUM IN, hardness_rating: 49.0 SHORE DUROMETER A MINIMUM AND 51.0 SHORE DUROMETER A MAXIMUM, outside_diameter: 2.875 INCHES NOMINAL IN, material_thickness: 0.074 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5310-00-297-9313, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
15465-6D
NSN: 5310-00-297-9313
FSC: 5310
CAGE: 70843 — HEARTHMARK CORP DBA JARDEN HOME BRANDS (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hole_diameter2.234 INCHES MINIMUM AND 2.266 INCHES MAXIMUM IN
hardness_rating49.0 SHORE DUROMETER A MINIMUM AND 51.0 SHORE DUROMETER A MAXIMUM
outside_diameter2.875 INCHES NOMINAL IN
material_thickness0.074 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
NSN5310-00-297-9313
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 15465-6D · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 2.875 INCHES NOMINAL IN
•
HOLE DIAMETER: 2.234 INCHES MINIMUM AND 2.266 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.074 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
HARDNESS RATING: 49.0 SHORE DUROMETER A MINIMUM AND 51.0 SHORE DUROMETER A MAXIMUM
TECHNICAL CHARACTERISTICS
OUTSIDE DIAMETER2.875 INCHES NOMINAL IN
HOLE DIAMETER2.234 INCHES MINIMUM AND 2.266 INCHES MAXIMUM IN
MATERIAL THICKNESS0.074 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC OVERALL
HARDNESS RATING49.0 SHORE DUROMETER A MINIMUM AND 51.0 SHORE DUROMETER A MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
11RInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
IRW 11RInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
266RInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
GGG-W-00649 TY6CLBInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
11R-4-25HPInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 15465-6D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15465-6D?
15465-6D is a WASHER,KEY.
What parts can replace 15465-6D?
There are 5 known substitutes for 15465-6D: 11R, IRW 11R, 266R and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 15465-6D?
15465-6D is cataloged in the Federal Logistics Information System under NSN 5310-00-297-9313. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15465-6D

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026