PartsTable
Technical Data Sheet
Download PDF

154427 — CLAMP,SYNCHRO

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

154427: CLAMP,SYNCHRO.

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 0.625 INCHES NOMINAL IN, height: 0.188 INCHES NOMINAL IN, length: 2.375 INCHES NOMINAL IN, hole_diameter: 0.125 INCHES NOMINAL IN, furnished_items: LOCKNUT, special_features: 2 HOLES,000 IN. CENTER-TO-CENTER DISTANCE BETWEEN HOLES IN.

This part is cataloged in the U.S. Government catalog under NSN 5340-00-325-1810, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
154427
NSN: 5340-00-325-1810
FSC: 5340 — Hardware, Commercial
CAGE: 57712 — TELEMECHANICS INC (USA)
SPECIFICATIONS
width0.625 INCHES NOMINAL IN
height0.188 INCHES NOMINAL IN
length2.375 INCHES NOMINAL IN
hole_diameter0.125 INCHES NOMINAL IN
furnished_itemsLOCKNUT
special_features2 HOLES,000 IN. CENTER-TO-CENTER DISTANCE BETWEEN HOLES IN
NSN5340-00-325-1810
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 154427 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 2.375 INCHES NOMINAL IN
•
HEIGHT: 0.188 INCHES NOMINAL IN
•
WIDTH: 0.625 INCHES NOMINAL IN
•
FURNISHED ITEMS: LOCKNUT
•
HOLE DIAMETER: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH2.375 INCHES NOMINAL IN
HEIGHT0.188 INCHES NOMINAL IN
SPECIAL FEATURES2 HOLES,000 IN. CENTER-TO-CENTER DISTANCE BETWEEN HOLES IN
WIDTH0.625 INCHES NOMINAL IN
FURNISHED ITEMSLOCKNUT
HOLE DIAMETER0.125 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 154427?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 154427?
154427 is a CLAMP,SYNCHRO.
What is the NSN for 154427?
154427 is cataloged in the U.S. Government catalog under NSN 5340-00-325-1810. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 154427

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.