PartsTable
Technical Data Sheet
Download PDF

154375 — CIRCUIT CARD ASSEMBLY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

154375: CIRCUIT CARD ASSEMBLY.

The CIRCUIT CARD ASSEMBLY is a the manufacturer industrial component. Key specifications include material: RUBBER, hole_diameter: 0.145 INCHES NOMINAL IN, overall_width: 5.000 INCHES NOMINAL IN, overall_height: 0.625 INCHES NOMINAL IN, overall_length: 7.000 INCHES NOMINAL IN, outside/top_flange_diameter: 0.443 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-895-3611, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
154375
NSN: 5340-00-895-3611
NIINs: 008953611, 010409764, 012267218
FSC: 5340 — Hardware, Commercial
CAGE: 57712 — TELEMECHANICS INC (USA)
SPECIFICATIONS
materialRUBBER
hole_diameter0.145 INCHES NOMINAL IN
overall_width5.000 INCHES NOMINAL IN
overall_height0.625 INCHES NOMINAL IN
overall_length7.000 INCHES NOMINAL IN
outside/top_flange_diameter0.443 INCHES NOMINAL IN
NSN5340-00-895-3611
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 154375 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE/TOP FLANGE DIAMETER: 0.443 INCHES NOMINAL IN
•
MATERIAL: RUBBER
•
HOLE DIAMETER: 0.145 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.593 INCHES NOMINAL IN
OUTSIDE/TOP FLANGE DIAMETER0.443 INCHES NOMINAL IN
SPECIAL FEATURESHOLE OFF CENTER
MATERIALRUBBER
HOLE DIAMETER0.145 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
TP154375Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 154375?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 154375?
154375 is a CIRCUIT CARD ASSEMBLY.
What parts can replace 154375?
There is 1 known substitute for 154375: TP154375. Substitute compatibility should be verified for your specific system.
What is the NSN for 154375?
154375 is cataloged in the U.S. Government catalog under NSN 5340-00-895-3611. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 154375