PartsTable
Technical Data Sheet
Download PDF

154329 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

154329: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.190 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN, material: STEEL OVERALL, overall_width: 0.750 INCHES NOMINAL IN, special_features: QUICK-RELEASE, style_designator: T-BOLT, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-054-2937, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
154329
NSN: 5340-01-054-2937
NIINs: 010542937, 010751720
FSC: 5340 — Hardware, Commercial
CAGE: 21877 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
diameter0.190 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
materialSTEEL OVERALL
overall_width0.750 INCHES NOMINAL IN
special_featuresQUICK-RELEASE
style_designatorT-BOLT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.065 INCHES NOMINAL IN
loop_inside_diameter9.785 INCHES NOMINAL IN
end_item_identificationA-10A A
general_characteristics_item_descriptionLENGTH 3.00 MAX,WIDTH 2.50 MAX,AND HEIGHT 1.31 INCHES IN
NSN5340-01-054-2937
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 154329 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: T-BOLT
•
DIAMETER: 0.190 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.065 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL: STEEL OVERALL
•
LOOP INSIDE DIAMETER: 9.785 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORT-BOLT
DIAMETER0.190 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.065 INCHES NOMINAL IN
SPECIAL FEATURESQUICK-RELEASE
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIALSTEEL OVERALL
LOOP INSIDE DIAMETER9.785 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 154329?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 154329?
154329 is a CLAMP,LOOP.
What is the NSN for 154329?
154329 is cataloged in the U.S. Government catalog under NSN 5340-01-054-2937. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 154329

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.