PartsTable
Technical Data Sheet
Download PDF

1542786-13 — NUT,PLAIN,SPLINE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

1542786-13: NUT,PLAIN,SPLINE.

The NUT,PLAIN,SPLINE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: SPLINE, nut_height: 0.130 INCHES MAXIMUM IN, nut_diameter: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN, pilot_length: 0.060 INCHES MAXIMUM IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-121-7944, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1542786-13
NSN: 5310-00-121-7944
FSC: 5310 — Nuts and Washers
CAGE: 64547 — HONEYWELL INTERNATIONAL, INC DIV AEROSPACE-TUCSON (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleSPLINE
nut_height0.130 INCHES MAXIMUM IN
nut_diameter0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
pilot_length0.060 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.223 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentTIN OVERALL
nominal_thread_size0.138 INCHES IN
thread_quantity_per_inch32
NSN5310-00-121-7944
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1542786-13 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.138 INCHES IN
•
NUT DIAMETER: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
•
PILOT DIAMETER: 0.223 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN
•
PILOT LENGTH: 0.060 INCHES MAXIMUM IN
•
NUT HEIGHT: 0.130 INCHES MAXIMUM IN
•
SURFACE TREATMENT: TIN OVERALL
TECHNICAL CHARACTERISTICS
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.138 INCHES IN
NUT DIAMETER0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
PILOT DIAMETER0.223 INCHES MINIMUM AND 0.229 INCHES MAXIMUM IN
PILOT LENGTH0.060 INCHES MAXIMUM IN
NUT HEIGHT0.130 INCHES MAXIMUM IN
SURFACE TREATMENTTIN OVERALL
NUT STYLESPLINE
THREAD CLASS2B
SUBSTITUTES & CROSS-REFERENCES 2
KF2-632-ETReference document
Same NSN cross-reference
Reference document — Secondary reference
KF2-632Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1542786-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1542786-13?
1542786-13 is a NUT,PLAIN,SPLINE.
What parts can replace 1542786-13?
There are 2 known substitutes for 1542786-13: KF2-632-ET, KF2-632. Substitute compatibility should be verified for your specific system.
What is the NSN for 1542786-13?
1542786-13 is cataloged in the U.S. Government catalog under NSN 5310-00-121-7944. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1542786-13

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.