The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.790 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN, length: 0.794 INCHES NOMINAL IN, material: STEEL COMP 631 OVERALL, hole_diameter: 0.098 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN, overall_height: 1.110 INCHES MINIMUM AND 1.114 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.
Government catalog under NSN 5340-01-325-2248, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
1541M25P07
NSN:5340-01-325-2248 FSC:5340 — Hardware, Commercial CAGE:07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
width
0.790 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
length
0.794 INCHES NOMINAL IN
material
STEEL COMP 631 OVERALL
hole_diameter
0.098 INCHES MINIMUM AND 0.102 INCHES MAXIMUM IN
overall_height
1.110 INCHES MINIMUM AND 1.114 INCHES MAXIMUM IN
mounting_method
UNTHREADED HOLE(S)
special_features
VAPOR BLAST OR PASSIVATION IF NECESSARY
material_thickness
0.022 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN
loop/holding_dimension
0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN
distance_from_loop_center_to_end
0.660 INCHES NOMINAL IN
material_document_and_classification
AMS 5528 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN
5340-01-325-2248
COMPONENT DIAGRAM
KEY FEATURES
•
LENGTH: 0.794 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5528 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.022 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.660 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT
1.110 INCHES MINIMUM AND 1.114 INCHES MAXIMUM IN
LENGTH
0.794 INCHES NOMINAL IN
MOUNTING METHOD
UNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATION
AMS 5528 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION
0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN
MATERIAL THICKNESS
0.022 INCHES MINIMUM AND 0.026 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END
0.660 INCHES NOMINAL IN
SPECIAL FEATURES
VAPOR BLAST OR PASSIVATION IF NECESSARY
WIDTH
0.790 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
MATERIAL
STEEL COMP 631 OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1541M25P07?
1541M25P07 is a CLIP,SPRING TENSION.
What parts can replace 1541M25P07?
There is 1 known substitute for 1541M25P07: 1541M25. Substitute compatibility should be verified for your specific system.
What is the NSN for 1541M25P07?
1541M25P07 is cataloged in the U.S. Government catalog under NSN 5340-01-325-2248. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.