PartsTable / O-RING / 154090
154090
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The ABRASIVE CYLINDER,MOUNTED is a the manufacturer industrial component. Key specifications include overall_length: 12.000 INCHES NOMINAL IN, special_features: WEAPON SYSTEM ESSENTIAL; ROTOR 12 INCH HIGH, 20.03 INCH DIAMETER; MATERIAL AS REQUIRED, TAN COLOR IN, surface_treatment: PAINTED, end_item_identification: 2350-01-420-4716, criticality_code_justification: FEAT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-579-6861, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
154090
NSN: 5331-00-579-6861 FSC: 5331 — O-RINGCAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
overall_length 12.000 INCHES NOMINAL IN special_features WEAPON SYSTEM ESSENTIAL; ROTOR 12 INCH HIGH, 20.03 INCH DIAMETER; MATERIAL AS REQUIRED, TAN COLOR IN surface_treatment PAINTED end_item_identification 2350-01-420-4716 criticality_code_justification FEAT NSN 5331-00-579-6861
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 154090
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• CENTER HOLE DIAMETER: 3.219 INCHES MINIMUM AND 3.249 INCHES MAXIMUM IN
• CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
• OUTSIDE DIAMETER: 3.480 INCHES MINIMUM AND 3.544 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATION MULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SPECIAL FEATURES IDENTICAL TO 5331-00-958-1236 EXCEPT FOR HARDNESS RATING CENTER HOLE DIAMETER 3.219 INCHES MINIMUM AND 3.249 INCHES MAXIMUM IN CROSS-SECTIONAL HEIGHT 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN OUTSIDE DIAMETER 3.480 INCHES MINIMUM AND 3.544 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
623014 Interchangeable interchangeable cross-reference
interchangeable
623014-1 Interchangeable interchangeable cross-reference
interchangeable
D3L1NN Interchangeable interchangeable cross-reference
interchangeable
6230-02-42 Interchangeable interchangeable cross-reference
interchangeable
6535 Interchangeable interchangeable cross-reference
interchangeable
0051988 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 154090?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 154090?
154090 is a ABRASIVE CYLINDER,MOUNTED.
What parts can replace 154090?
There are 29 known substitutes for 154090: 623014, 623014-1, D3L1NN and 26 more. Substitute compatibility should be verified for your specific system.
Is 154090 still available?
154090 is currently cancelled.