PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 154-13
154-13 ✓ Verified by PartsTable
Trefl · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

- High quality 2.1 speaker set with wooden subwoofer and a total RMS power output of 50 Watt.<br>- Wired volume remote control with integrated 3.5 mm connection for MP3/iPod and headphones.<br>- Subwoofer with large 5.25" speaker and bass reflex design for extra deep bass.<br>- Tilted design satellite speakers for best listening position.<br>- Extra bass control on the back of the subwoofer.<br>- Also suitable for DVD players and other audio devices with analogue RCA output.<br> This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-464-7347, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
154-13
NSN: 5330-00-464-7347
FSC: 5330
CAGE: 24346 — LDI INDUSTRIES, INC. DBA LDI INDUSTRIES INC (USA)
SPECIFICATIONS
materialSTEEL
bore_typePLAIN STRAIGHT
bore_diameter0.747 INCHES MINIMUM AND 0.752 INCHES MAXIMUM IN
overall_width2.000 INCHES NOMINAL IN
material_document_and_classificationSAE 1010 ASSN STD SINGLE MATERIAL RESPONSE
center_to_center_distance_between_link_and_shaft_holes3.750 INCHES NOMINAL IN
NSN5330-00-464-7347
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 154-13 MFR: Trefl ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.500 INCHES NOMINAL IN
•
APERTURE DIAMETER: 0.296 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.500 INCHES NOMINAL IN
APERTURE DIAMETER0.296 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
STYLE DESIGNATORCIRCULAR
MATERIALRUBBER SYNTHETIC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
154-01300Interchangeable
interchangeable cross-reference
interchangeable
154-13Interchangeable
interchangeable cross-reference
interchangeable
Z00.N7061731111Interchangeable
interchangeable cross-reference
interchangeable
154-2769Interchangeable
interchangeable cross-reference
interchangeable
A8886Interchangeable
interchangeable cross-reference
interchangeable
1458Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 154-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 154-13?
154-13 is a LEVER,REMOTE CONTROL manufactured by Trefl.
What parts can replace 154-13?
There are 11 known substitutes for 154-13: 154-01300, 154-13, Z00.N7061731111 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 154-13?
154-13 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-464-7347. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 154-13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026