PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 154-123
154-123 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The LEVER,MANUAL CONTROL is a the manufacturer industrial component. Key specifications include special_features: MATERIAL; FINISH,PASSIVATED; 5.281 IN. LG; 0.938 IN.

W; 0.125 IN. H; ONE MTG HOLE 0.938 IN. DIA IN, fsc_application_data: TELETYPE AND FACSIMILE EQUIPMENT.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1711, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
154-123
NSN: 3110-00-156-1711
FSC: 3110
CAGE: 72915 — GENERAL MOTORS CORP ELECTRO-MOTIVE DIV (USA)
SPECIFICATIONS
special_featuresMATERIAL; FINISH,PASSIVATED; 5.281 IN. LG; 0.938 IN. W; 0.125 IN. H; ONE MTG HOLE 0.938 IN. DIA IN
fsc_application_dataTELETYPE AND FACSIMILE EQUIPMENT
NSN3110-00-156-1711
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 154-123 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 1.5312 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
BORE SMALLEST DIAMETER: 0.7500 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
•
MATERIAL: STEEL COMP E51100 OR STEEL COMP E52100 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
OVERALL OUTSIDE DIAMETER1.5312 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
OVERALL HEIGHT0.6250 INCHES NOMINAL IN
BORE SMALLEST DIAMETER0.7500 INCHES NOMINAL IN
SPECIAL FEATURES0.7813 LARGE BORE
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGS
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
N11061-4-100FInterchangeable
interchangeable cross-reference
interchangeable
DD3483Interchangeable
interchangeable cross-reference
interchangeable
10199Interchangeable
interchangeable cross-reference
interchangeable
06Interchangeable
interchangeable cross-reference
interchangeable
430-6Interchangeable
interchangeable cross-reference
interchangeable
820A113Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 154-123?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 154-123?
154-123 is a LEVER,MANUAL CONTROL.
What parts can replace 154-123?
There are 32 known substitutes for 154-123: N11061-4-100F, DD3483, 10199 and 29 more. Substitute compatibility should be verified for your specific system.
Is 154-123 still available?
154-123 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 154-123

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026