PartsTable
Technical Data Sheet
Download PDF

153C5464P1 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

153C5464P1: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 630 OVERALL, fork_depth: 0.600 INCHES NOMINAL IN, thread_class: 3B ROD CONNECTION, hole_diameter: 0.1645 INCHES MINIMUM AND 0.1650 INCHES MAXIMUM IN, overall_width: 0.400 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN, thread_length: 0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM ROD CONNECTION IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-229-4155, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
153C5464P1
NSN: 5340-01-229-4155
FSC: 5340 — Hardware, Commercial
CAGE: 0BGB4 — TUSK MANUFACTURING INC (USA)
SPECIFICATIONS
materialSTEEL COMP 630 OVERALL
fork_depth0.600 INCHES NOMINAL IN
thread_class3B ROD CONNECTION
hole_diameter0.1645 INCHES MINIMUM AND 0.1650 INCHES MAXIMUM IN
overall_width0.400 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
thread_length0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM ROD CONNECTION IN
fork_span_width0.250 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
thread_directionRIGHT-HAND ROD CONNECTION
surface_treatmentPASSIVATE OVERALL
fork_arm_thickness0.078 INCHES NOMINAL IN
nominal_thread_size0.190 INCHES ROD CONNECTION IN
metallic_hardness_rating35.0 MINIMUM ROCKWELL C AND 42.0 MAXIMUM ROCKWELL C
NSN5340-01-229-4155
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 153C5464P1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 0.250 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
•
SECURING PIN HOLE DIAMETER: 0.069 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.078 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-STD-171,FINISH NO. 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM ROD CONNECTION IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND ROD CONNECTION
TECHNICAL CHARACTERISTICS
FORK SPAN WIDTH0.250 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
SECURING PIN HOLE DIAMETER0.069 INCHES MINIMUM AND 0.074 INCHES MAXIMUM IN
FORK ARM THICKNESS0.078 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-STD-171,FINISH NO. 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.890 INCHES MINIMUM AND 0.910 INCHES MAXIMUM ROD CONNECTION IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.400 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
NOMINAL THREAD SIZE0.190 INCHES ROD CONNECTION IN
SURFACE TREATMENTPASSIVATE OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 153C5464P1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 153C5464P1?
153C5464P1 is a CLEVIS,ROD END.
What is the NSN for 153C5464P1?
153C5464P1 is cataloged in the U.S. Government catalog under NSN 5340-01-229-4155. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 153C5464P1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.