PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 153884

153884 — Technical Data Sheet

✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 15.00 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND, inner_ring_width: 0.4800 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-6117, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
153884
NSN: 3110-00-554-6117
FSC: 3110
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter15.00 MILLIMETERS NOMINAL MM
seal_quantity1
load_directionRADIAL
surface_finishGROUND
inner_ring_width0.4800 INCHES NOMINAL IN
outer_ring_width0.5000 INCHES NOMINAL IN
special_featuresW/OR W/O FELT CORE SEALS
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeLABYRINTH
end_item_identificationAN/APM-424 SYSTEM
NSN3110-00-554-6117
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 153884 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL QUANTITY: 1
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
RETAINER FABRICATION METHOD: PRESSED
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
•
OUTER RING WIDTH: 0.5000 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 35.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS (FLIS)
SEAL QUANTITY1
INTERNAL FIT-UP DESIGNATIONSTANDARD
RETAINER FABRICATION METHODPRESSED
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OVERALL
OUTER RING WIDTH0.5000 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER35.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
BEARING SEAL TYPELABYRINTH
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
101020Interchangeable
interchangeable cross-reference
interchangeable
1060AInterchangeable
interchangeable cross-reference
interchangeable
1060Interchangeable
interchangeable cross-reference
interchangeable
22HS682Interchangeable
interchangeable cross-reference
interchangeable
99506Interchangeable
interchangeable cross-reference
interchangeable
6206DDUCE1SA2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 153884?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 153884?
153884 is a BEARING,BALL,ANNULAR.
What parts can replace 153884?
There are 27 known substitutes for 153884: 101020, 1060A, 1060 and 24 more. Substitute compatibility should be verified for your specific system.
Is 153884 still available?
153884 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 153884

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026