PartsTable
Technical Data Sheet
Download PDF

15375297 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

15375297: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 1.424 INCHES MINIMUM AND 1.458 INCHES MAXIMUM IN, center_hole_diameter: 1.295 INCHES MINIMUM AND 1.307 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-729-4992, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
15375297
NSN: 5331-00-729-4992
FSC: 5331 — O-ring
CAGE: K6451 — BAE SYSTEMS MARINE LIMITED (GBR)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter1.424 INCHES MINIMUM AND 1.458 INCHES MAXIMUM IN
center_hole_diameter1.295 INCHES MINIMUM AND 1.307 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-729-4992
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 15375297 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.424 INCHES MINIMUM AND 1.458 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.295 INCHES MINIMUM AND 1.307 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.424 INCHES MINIMUM AND 1.458 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.295 INCHES MINIMUM AND 1.307 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 8
AS3570-228Reference document
Same NSN cross-reference
Reference document — Secondary reference
HTE5917-029Reference document
Same NSN cross-reference
Reference document — Secondary reference
HTE7300N8-027Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
027-737-70Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SAE-AS28775Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
MS28775-027Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 15375297?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15375297?
15375297 is a O-RING.
What parts can replace 15375297?
There are 8 known substitutes for 15375297: AS3570-228, HTE5917-029, HTE7300N8-027 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 15375297?
15375297 is cataloged in the U.S. Government catalog under NSN 5331-00-729-4992. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15375297