PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 153172
153172 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

SHIELD,HEAT,AIRCRAFT GAS TURBINE. Key specifications include material: STEEL CORROSION RESISTING, overall_length: 7.250 INCHES MAXIMUM IN, special_features: SURGICAL SCISSORS, THOREK DISSECTING, FULL-CURVE, end_item_identification: HR/A-15 HELICOPTER, engine_section_location: EXHAUST, part_name_assigned_by_controlling_agency: SCISSORS SURGICAL THOREK 7.25 IN. LONG FULL CURVE STAINLESS STEEL IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-091-9578, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
153172
NSN: 5340-00-091-9578
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
overall_length7.250 INCHES MAXIMUM IN
special_featuresSURGICAL SCISSORS, THOREK DISSECTING, FULL-CURVE
end_item_identificationHR/A-15 HELICOPTER
engine_section_locationEXHAUST
part_name_assigned_by_controlling_agencySCISSORS SURGICAL THOREK 7.25 IN. LONG FULL CURVE STAINLESS STEEL IN
NSN5340-00-091-9578
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 153172 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
MATERIAL THICKNESS: 0.040 INCHES NOMINAL IN
•
LENGTH: 3.1255 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
MATERIAL THICKNESS0.040 INCHES NOMINAL IN
LENGTH3.1255 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
6515NCM071253Upgraded Successor
successor cross-reference
successor
15-3172Upgraded Successor
successor cross-reference
successor
2956Upgraded Successor
successor cross-reference
successor
9751-34Interchangeable
interchangeable cross-reference
interchangeable
TP153172Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 153172?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 153172?
153172 is a SHIELD,HEAT,AIRCRAFT GAS TURBINE.
What parts can replace 153172?
There are 5 known substitutes for 153172: 6515NCM071253, 15-3172, 2956 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 153172?
153172 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-091-9578. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 153172

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026