PartsTable
Technical Data Sheet
Download PDF

1530B95-1 — LOCKING PLATE,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1530B95-1: LOCKING PLATE,NUT AND BOLT.

The LOCKING PLATE,NUT AND BOLT is a the manufacturer industrial component. Key specifications include width: 0.750 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN, material: STEEL COMP 304, plate_thickness: 0.031 INCHES NOMINAL IN, special_features: NAVY IRPOD REQUIREMENTS WERE REMOVED FROM THIS NSN ON 08/30/2022, style_designator: STRAIGHT, special_test_features: SPECIAL QUALITY CONTROL TESTING. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-032-3960, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1530B95-1
NSN: 5340-01-032-3960
FSC: 5340 — Hardware, Commercial
CAGE: 04808 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DIV CURTISS-WRIGHT EMD (USA)
SPECIFICATIONS
width0.750 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
materialSTEEL COMP 304
plate_thickness0.031 INCHES NOMINAL IN
special_featuresNAVY IRPOD REQUIREMENTS WERE REMOVED FROM THIS NSN ON 08/30/2022
style_designatorSTRAIGHT
special_test_featuresSPECIAL QUALITY CONTROL TESTING
mounting_hole_diameter0.440 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
mounting_hole_quantity2
cross-sectional_shape_styleFLAT
material_document_and_classificationQQ-S-766, CLASS 304, COND A FED SPEC SINGLE MATERIAL RESPONSE
distance_between_mounting_hole_centers3.190 INCHES NOMINAL IN
NSN5340-01-032-3960
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1530B95-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
PLATE THICKNESS: 0.031 INCHES NOMINAL IN
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 3.190 INCHES NOMINAL IN
•
SPECIAL TEST FEATURES: SPECIAL QUALITY CONTROL TESTING
•
STYLE DESIGNATOR: STRAIGHT
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-766, CLASS 304, COND A FED SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.440 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: FLAT
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY2
PLATE THICKNESS0.031 INCHES NOMINAL IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS3.190 INCHES NOMINAL IN
SPECIAL TEST FEATURESSPECIAL QUALITY CONTROL TESTING
STYLE DESIGNATORSTRAIGHT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766, CLASS 304, COND A FED SPEC SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.440 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEFLAT
SPECIAL FEATURESNAVY IRPOD REQUIREMENTS WERE REMOVED FROM THIS NSN ON 08/30/2022
WIDTH0.750 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
LO-010323960Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1530B95-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1530B95-1?
1530B95-1 is a LOCKING PLATE,NUT AND BOLT.
What parts can replace 1530B95-1?
There is 1 known substitute for 1530B95-1: LO-010323960. Substitute compatibility should be verified for your specific system.
What is the NSN for 1530B95-1?
1530B95-1 is cataloged in the U.S. Government catalog under NSN 5340-01-032-3960. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1530B95-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.