PartsTable
Technical Data Sheet
PartsTable / MRO / 153023
153023 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

RECTIFIER,SEMICONDUCTOR DEVICE,U. Key specifications include color: GRAY/GREY, material: PLASTIC, overall_width: 0.813 INCHES NOMINAL IN, overall_height: 0.750 INCHES NOMINAL IN, overall_length: 1.188 INCHES NOMINAL IN, special_features: TWO UNTHREADED MTG HOLES 0.109 IN. DIA, SPACED 0.375 IN.

C TO C IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-011-5547, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 153023
NSN: 5310-00-011-5547
FSC: 5310
CAGE: 08683 — BROCKWAY MOTOR TRUCKS DIV OF MACK TRUCKS INC (USA)
SPECIFICATIONS
colorGRAY/GREY
materialPLASTIC
overall_width0.813 INCHES NOMINAL IN
overall_height0.750 INCHES NOMINAL IN
overall_length1.188 INCHES NOMINAL IN
special_featuresTWO UNTHREADED MTG HOLES 0.109 IN. DIA, SPACED 0.375 IN. C TO C IN
NSN5310-00-011-5547
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 153023 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
HOLE DIAMETER: 0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.460 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1060 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
STYLE DESIGNATORFLAT INTERNAL TEETH
HOLE DIAMETER0.256 INCHES MINIMUM AND 0.267 INCHES MAXIMUM IN
MATERIAL THICKNESS0.023 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.460 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1060 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
TT024Interchangeable
interchangeable cross-reference
interchangeable
P-24Interchangeable
interchangeable cross-reference
interchangeable
CA310Interchangeable
interchangeable cross-reference
interchangeable
F-24Interchangeable
interchangeable cross-reference
interchangeable
C12233-7Interchangeable
interchangeable cross-reference
interchangeable
70R4S2500Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 153023?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 153023?
153023 is a RECTIFIER,SEMICONDUCTOR DEVICE,U. It is classified as a MRO (MRO_GENERAL).
What parts can replace 153023?
There are 31 known substitutes for 153023: TT024, P-24, CA310 and 28 more. Substitute compatibility should be verified for your specific system.
Is 153023 still available?
153023 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 153023

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026