PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 153-223
153-223 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The CHOKE,SOLENOID is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-229-1236, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
153-223
NSN: 5310-00-229-1236
FSC: 5310
CAGE: 55284 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL DIV AEROSPACE-SOUTH BEND (WESTMOOR ST) (USA)
SPECIFICATIONS
general_characteristics_item_descriptionMATERIAL STEEL; 12 VOLT; O/A LENGTH 3.375 IN.,O/A WIDTH 1.875 IN.,O/A HEIGHT 2.500 IN.; ARM LENGTH 2.500 IN.,WIDTH OF ARM MAX 0.594 IN. AND MIN 0.344 IN IN
NSN5310-00-229-1236
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 153-223 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.710 INCHES NOMINAL IN
•
HEAT TREATMENT: AS FABRICATED
•
SHOULDER DIAMETER: 0.500 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
RECESS ANGLE: 100.0 DEGREES NOMINAL
•
HOLE DIAMETER: 0.188 INCHES NOMINAL IN
•
SHOULDER HEIGHT: 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.710 INCHES NOMINAL IN
HEAT TREATMENTAS FABRICATED
SHOULDER DIAMETER0.500 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
RECESS ANGLE100.0 DEGREES NOMINAL
HOLE DIAMETER0.188 INCHES NOMINAL IN
SHOULDER HEIGHT0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
STYLE DESIGNATORSHOULDERED AND RECESSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
45V18Interchangeable
interchangeable cross-reference
interchangeable
HP-20Interchangeable
interchangeable cross-reference
interchangeable
WN-20Interchangeable
interchangeable cross-reference
interchangeable
153-0223Interchangeable
interchangeable cross-reference
interchangeable
153A223Interchangeable
interchangeable cross-reference
interchangeable
153-223Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 153-223?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 153-223?
153-223 is a CHOKE,SOLENOID.
What parts can replace 153-223?
There are 9 known substitutes for 153-223: 45V18, HP-20, WN-20 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 153-223?
153-223 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-229-1236. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 153-223

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026