PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 153-015
153-015 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY OVERALL, peripheral_diameter: 2.630 INCHES MINIMUM AND 2.635 INCHES MAXIMUM IN, center_hole_diameter: 2.062 INCHES NOMINAL IN, cross-sectional_height: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN, cross-sectional_shape_style: SPECIAL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-869-9014, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
153-015
NSN: 5330-00-869-9014
FSC: 5330
CAGE: 33269 — AIRCRAFT WHEEL AND BRAKE, LLC DBA CLEVELAND WHEEL AND BRAKE SYSTEMS (USA)
SPECIFICATIONS
materialALUMINUM ALLOY OVERALL
peripheral_diameter2.630 INCHES MINIMUM AND 2.635 INCHES MAXIMUM IN
center_hole_diameter2.062 INCHES NOMINAL IN
cross-sectional_height0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
cross-sectional_shape_styleSPECIAL
NSN5330-00-869-9014
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 153-015 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: ALUMINUM ALLOY OVERALL
•
PERIPHERAL DIAMETER: 2.630 INCHES MINIMUM AND 2.635 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.062 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALALUMINUM ALLOY OVERALL
PERIPHERAL DIAMETER2.630 INCHES MINIMUM AND 2.635 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.062 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESPECIAL
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
PEI 7596Interchangeable
interchangeable cross-reference
interchangeable
15315Interchangeable
interchangeable cross-reference
interchangeable
M902424-1SUB1Interchangeable
interchangeable cross-reference
interchangeable
33-1531-5Interchangeable
interchangeable cross-reference
interchangeable
RPJ-12-B5Interchangeable
interchangeable cross-reference
interchangeable
2291545Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 153-015?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 153-015?
153-015 is a RETAINER,PACKING.
What parts can replace 153-015?
There are 22 known substitutes for 153-015: PEI 7596, 15315, M902424-1SUB1 and 19 more. Substitute compatibility should be verified for your specific system.
Is 153-015 still available?
153-015 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 153-015

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026