PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 15265P
15265P ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SNAP HOOK is a the manufacturer industrial component. Key specifications include material: IRON MALLEABLE CONNECTION END, design_type: SWIVEL, inside_width: 0.750 INCHES NOMINAL IN, inside_length: 0.688 INCHES NOMINAL IN, overall_length: 4.062 INCHES NOMINAL IN, unattached_ring: NOT INCLUDED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-297-6576, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
15265P
NSN: 5340-00-297-6576
FSC: 5340
CAGE: 98255 — DRS SUSTAINMENT SYSTEMS INC (USA)
SPECIFICATIONS
materialIRON MALLEABLE CONNECTION END
design_typeSWIVEL
inside_width0.750 INCHES NOMINAL IN
inside_length0.688 INCHES NOMINAL IN
overall_length4.062 INCHES NOMINAL IN
unattached_ringNOT INCLUDED
end_connection_styleEYE
hook_style_designatorSLIDING BOLT
rubber_covered_featureNOT INCLUDED
NSN5340-00-297-6576
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 15265P MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE WIDTH: 0.750 INCHES NOMINAL IN
•
END CONNECTION STYLE: EYE
•
MATERIAL: IRON MALLEABLE CONNECTION END
•
HOOK STYLE DESIGNATOR: SLIDING BOLT
•
RUBBER COVERED FEATURE: NOT INCLUDED
•
UNATTACHED RING: NOT INCLUDED
•
INSIDE LENGTH: 0.688 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
INSIDE WIDTH0.750 INCHES NOMINAL IN
END CONNECTION STYLEEYE
MATERIALIRON MALLEABLE CONNECTION END
MATERIALIRON MALLEABLE HOOK
HOOK STYLE DESIGNATORSLIDING BOLT
RUBBER COVERED FEATURENOT INCLUDED
UNATTACHED RINGNOT INCLUDED
INSIDE LENGTH0.688 INCHES NOMINAL IN
OVERALL LENGTH4.062 INCHES NOMINAL IN
DESIGN TYPESWIVEL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
628Interchangeable
interchangeable cross-reference
interchangeable
105TInterchangeable
interchangeable cross-reference
interchangeable
V450AInterchangeable
interchangeable cross-reference
interchangeable
998-0669-00Interchangeable
interchangeable cross-reference
interchangeable
22534Interchangeable
interchangeable cross-reference
interchangeable
2050852Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 15265P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15265P?
15265P is a SNAP HOOK.
What parts can replace 15265P?
There are 9 known substitutes for 15265P: 628, 105T, V450A and 6 more. Substitute compatibility should be verified for your specific system.
Is 15265P still available?
15265P is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15265P

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026