PartsTable
Technical Data Sheet
Download PDF

152-0136-004 — STANDOFF,THREADED,SPACING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

152-0136-004: STANDOFF,THREADED,SPACING.

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 2011 OR ALUMINUM ALLOY 2024 OVERALL, thread_length: 0.375 INCHES MINIMUM RIGHT INTERNAL IN, special_features: THRU THREAD OPTIONAL, style_designator: LEFT INTERNAL AND RIGHT INTERNAL THREADS, surface_treatment: ANODIZE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-062-1902, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
152-0136-004
NSN: 5340-01-062-1902
FSC: 5340 — Hardware, Commercial
CAGE: 94756 — THE BOEING COMPANY DIV LEGACY BOEING HB1 (USA)
SPECIFICATIONS
length0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
materialALUMINUM ALLOY 2011 OR ALUMINUM ALLOY 2024 OVERALL
thread_length0.375 INCHES MINIMUM RIGHT INTERNAL IN
special_featuresTHRU THREAD OPTIONAL
style_designatorLEFT INTERNAL AND RIGHT INTERNAL THREADS
surface_treatmentANODIZE OVERALL
width_across_flats0.246 INCHES MINIMUM AND 0.254 INCHES MAXIMUM IN
cross-sectional_shapeHEXAGON
specification/standard_data80205-NAS1786 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
material_document_and_classificationQQ-A-225/3 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/6 FED SPEC 2ND MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625, TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-A-8625, TYPE 2, CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-062-1902
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 152-0136-004 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.246 INCHES MINIMUM AND 0.254 INCHES MAXIMUM IN
•
LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625, TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-A-8625, TYPE 2, CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.375 INCHES MINIMUM LEFT INTERNAL (INCLUDES THRU THREAD) IN
•
STYLE DESIGNATOR: LEFT INTERNAL AND RIGHT INTERNAL THREADS
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/3 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/6 FED SPEC 2ND MATERIAL RESPONSE OVERALL
•
SPECIFICATION/STANDARD DATA: 80205-NAS1786 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.246 INCHES MINIMUM AND 0.254 INCHES MAXIMUM IN
LENGTH0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625, TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-A-8625, TYPE 2, CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.375 INCHES MINIMUM LEFT INTERNAL (INCLUDES THRU THREAD) IN
THREAD LENGTH0.375 INCHES MINIMUM RIGHT INTERNAL IN
STYLE DESIGNATORLEFT INTERNAL AND RIGHT INTERNAL THREADS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/3 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/6 FED SPEC 2ND MATERIAL RESPONSE OVERALL
SPECIFICATION/STANDARD DATA80205-NAS1786 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
CROSS-SECTIONAL SHAPEHEXAGON
SPECIAL FEATURESTHRU THREAD OPTIONAL
SUBSTITUTES & CROSS-REFERENCES 1
945957-1612Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 152-0136-004?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 152-0136-004?
152-0136-004 is a STANDOFF,THREADED,SPACING.
What parts can replace 152-0136-004?
There is 1 known substitute for 152-0136-004: 945957-1612. Substitute compatibility should be verified for your specific system.
What is the NSN for 152-0136-004?
152-0136-004 is cataloged in the U.S. Government catalog under NSN 5340-01-062-1902. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 152-0136-004

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.