PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 15165
15165 ✓ Verified by PartsTable
Clementoni · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PLATE,WEAR,BRAKE SHOE is a Clementoni industrial component. Key specifications include body_length: 1.200 INCHES MAXIMUM IN, hole_diameter: 0.221 INCHES MINIMUM AND 0.232 INCHES MAXIMUM IN, overall_width: 4.876 INCHES NOMINAL IN, inclosure_type: FULLY INCLOSED, overall_length: 7.001 INCHES NOMINAL IN, countersink_deg: 90.0. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-550-3722, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
15165
NSN: 5310-00-550-3722
FSC: 5310
CAGE: 30076 — HYSTER-YALE GROUP, INC. (USA)
SPECIFICATIONS
body_length1.200 INCHES MAXIMUM IN
hole_diameter0.221 INCHES MINIMUM AND 0.232 INCHES MAXIMUM IN
overall_width4.876 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
overall_length7.001 INCHES NOMINAL IN
countersink_deg90.0
hardness_rating45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
mounting_methodTHREADED HOLE(S) SINGLE GROUP
frequency_rating80.0 KILOHERTZ NOMINAL SINGLE COMPONENT
outside_diameter0.427 INCHES NOMINAL IN
special_features4 PRIMARY WINDINGS; 7 SECONDARY WINDINGS
style_designatorSPLIT HELICAL-RIGHT HAND
NSN5310-00-550-3722
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 15165 · Clementoni ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONDEFINITIVE SPEC/STD DATA: A CLASS AND 1 STYLE
•
MATERIAL: STEEL COMP 1060 AND STEEL COMP 1561 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1566 OR STEEL COMP 1069 OR STEEL COMP 1070 OR STEEL COMP 1572 OR STEEL COMP 1074 OR STEEL COMP 1075 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL
•
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY DIM.
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
HOLE DIAMETER: 0.221 INCHES MINIMUM AND 0.232 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.427 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL THICKNESS: 0.047 INCHES MINIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
NONDEFINITIVE SPEC/STD DATAA CLASS AND 1 STYLE
MATERIALSTEEL COMP 1060 AND STEEL COMP 1561 OR STEEL COMP 1064 OR STEEL COMP 1065 OR STEEL COMP 1566 OR STEEL COMP 1069 OR STEEL COMP 1070 OR STEEL COMP 1572 OR STEEL COMP 1074 OR STEEL COMP 1075 OR STEEL COMP 1078 OR STEEL COMP 1080 OVERALL
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY DIM.
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
HOLE DIAMETER0.221 INCHES MINIMUM AND 0.232 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.427 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL THICKNESS0.047 INCHES MINIMUM IN
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
1914579Interchangeable
interchangeable cross-reference
interchangeable
962-1-75X1ALT1ITEM7CInterchangeable
interchangeable cross-reference
interchangeable
86-397-6Interchangeable
interchangeable cross-reference
interchangeable
984-1-2M1ALT3PC2Interchangeable
interchangeable cross-reference
interchangeable
320570Interchangeable
interchangeable cross-reference
interchangeable
N10BSInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 15165?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15165?
15165 is a PLATE,WEAR,BRAKE SHOE manufactured by Clementoni.
What parts can replace 15165?
There are 26 known substitutes for 15165: 1914579, 962-1-75X1ALT1ITEM7C, 86-397-6 and 23 more. Substitute compatibility should be verified for your specific system.
Is 15165 still available?
15165 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15165

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026