PartsTable
Technical Data Sheet
Download PDF

15160-23 — CIRCUIT CARD ASSEMBLY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

15160-23: CIRCUIT CARD ASSEMBLY.

The CIRCUIT CARD ASSEMBLY is a the manufacturer industrial component. Key specifications include overall_width: 4.825 INCHES NOMINAL IN, overall_height: 0.674 INCHES NOMINAL IN, overall_length: 5.370 INCHES MINIMUM AND 5.385 INCHES MAXIMUM IN, special_features: PLUG-IN MOUNTING, center_hole_diameter: 5.952 INCHES MINIMUM AND 5.998 INCHES MAXIMUM IN, cross-sectional_height: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-196-5350, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
15160-23
NSN: 5330-00-196-5350
NIINs: 001965350, 010606391
FSC: 5330 — Packing and Gasket Materials
CAGE: 29899 — CALGON CARBON UV TECHNOLOGIES LLC DBA HYDE MARINE (USA)
SPECIFICATIONS
overall_width4.825 INCHES NOMINAL IN
overall_height0.674 INCHES NOMINAL IN
overall_length5.370 INCHES MINIMUM AND 5.385 INCHES MAXIMUM IN
special_featuresPLUG-IN MOUNTING
center_hole_diameter5.952 INCHES MINIMUM AND 5.998 INCHES MAXIMUM IN
cross-sectional_height0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
end_item_identification6625010223257 ELECTRONIC SYSTEMS TEST SET
part_name_assigned_by_controlling_agencyFUNCTION/DISPERSION AND SCOPE CONTROL GENERATOR
NSN5330-00-196-5350
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 15160-23 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 5.952 INCHES MINIMUM AND 5.998 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
CENTER HOLE DIAMETER5.952 INCHES MINIMUM AND 5.998 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 8
N304-7-B64Reference document
Same NSN cross-reference
Reference document — Secondary reference
3600-254REVAPCAN6227-64Reference document
Same NSN cross-reference
Reference document — Secondary reference
AN6227-64Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AN6227PC64Reference document
Same NSN cross-reference
Reference document — Secondary reference
PS1-30-5-64Reference document
Same NSN cross-reference
Reference document — Secondary reference
AN6227B-64Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 15160-23?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15160-23?
15160-23 is a CIRCUIT CARD ASSEMBLY.
What parts can replace 15160-23?
There are 8 known substitutes for 15160-23: N304-7-B64, 3600-254REVAPCAN6227-64, AN6227-64 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 15160-23?
15160-23 is cataloged in the U.S. Government catalog under NSN 5330-00-196-5350. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15160-23