PartsTable
Technical Data Sheet
PartsTable / MRO / 1516
1516 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include color: BROWN, material: STEEL, base_style: TWO SCREW TERMINALS, body_style: WALL TYPE W/ OR W/O COVER, body_width: 1.200 INCHES MAXIMUM IN, bulb_style: PAR (PARABOLIC, ALUMINIZED REFLECTOR). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-097-1673, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1516
NSN: 5330-00-097-1673
FSC: 5330
CAGE: 77931 — EG AND G SEALOL INDUSTRIAL SEALING DIV (USA)
SPECIFICATIONS
colorBROWN
materialSTEEL
base_styleTWO SCREW TERMINALS
body_styleWALL TYPE W/ OR W/O COVER
body_width1.200 INCHES MAXIMUM IN
bulb_stylePAR (PARABOLIC, ALUMINIZED REFLECTOR)
shell_typeSOLID
body_height0.600 INCHES MAXIMUM IN
body_length1.800 INCHES MAXIMUM IN
power_sourceEXTERNAL
body_diameter0.313 INCHES NOMINAL IN
terminal_typeSCREW SINGLE MATING END ALL CONTACT GROUPINGS
NSN5330-00-097-1673
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1516 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.188 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 2.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: FLANGE
•
RIM SURFACE WIDTH: 0.062 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
CENTER HOLE DIAMETER: 1.281 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.188 INCHES NOMINAL IN
PERIPHERAL DIAMETER2.125 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEFLANGE
RIM SURFACE WIDTH0.062 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
CENTER HOLE DIAMETER1.281 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
8280K16Interchangeable
interchangeable cross-reference
interchangeable
7620434P88Interchangeable
interchangeable cross-reference
interchangeable
RNC55H9310DSInterchangeable
interchangeable cross-reference
interchangeable
8280K14Interchangeable
interchangeable cross-reference
interchangeable
1516-1HInterchangeable
interchangeable cross-reference
interchangeable
1516Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1516?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1516?
1516 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1516?
There are 30 known substitutes for 1516: 8280K16, 7620434P88, RNC55H9310DS and 27 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1516?
1516 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-097-1673. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1516

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026