1514608: CABLE ASSEMBLY,SPECIAL PURPOSE,E.
CABLE ASSEMBLY,SPECIAL PURPOSE,E. Key specifications include material: PLASTIC POLYVINYL CHLORIDE (PVC) ALL THREADED PORTIONS, conductor_form: STRANDED ALL CONDUCTORS, special_features: A JUMPER WIRE IS USED BETWEEN PIN 23 AND PIN 25 IN CONNECTOR PLUG 1820107-008 OF 20 GAGE BARE WIRE IN, termination_type: CONNECTOR PLUG BOTH ENDS ALL CONDUCTORS, round_conductor_size: 20 AWG ALL CONDUCTORS, cross-sectional_shape_style: ROUND. This part is cataloged in the U.S.
Government catalog under NSN 6150-00-225-5239, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | PLASTIC POLYVINYL CHLORIDE (PVC) ALL THREADED PORTIONS |
| conductor_form | STRANDED ALL CONDUCTORS |
| special_features | A JUMPER WIRE IS USED BETWEEN PIN 23 AND PIN 25 IN CONNECTOR PLUG 1820107-008 OF 20 GAGE BARE WIRE IN |
| termination_type | CONNECTOR PLUG BOTH ENDS ALL CONDUCTORS |
| conductor_quantity | 7 |
| round_conductor_size | 20 AWG ALL CONDUCTORS |
| cross-sectional_shape_style | ROUND |
| strand_awg_size_per_conductor | 28 ALL CONDUCTORS |
| strand_quantity_per_conductor | 7 ALL CONDUCTORS |
| cross_section_outside_diameter | 0.375 INCHES NOMINAL IN |
| conductor_arrangement_and_quantity | 7 SINGLES |
| material_document_and_classification | MIL-W-16878 MIL SPEC SINGLE MATERIAL RESPONSE FIRST POSITION PRIMARY INSULATION ALL CONDUCTORS |
| NSN | 6150-00-225-5239 |
| ROUND CONDUCTOR SIZE | 20 AWG ALL CONDUCTORS |
| TERMINATION TYPE | CONNECTOR PLUG BOTH ENDS ALL CONDUCTORS |
| COLOR CODING DOCUMENT | MIL-C-915A-10001 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). A |
| TERMINAL MANUFACTURER IDENTIFYING REFERENCE NUMBER | 1820107-008 FIRST END ALL CONDUCTORS |
| TERMINAL MANUFACTURER IDENTIFYING REFERENCE NUMBER | MS3106R-18-8P SECOND END ALL CONDUCTORS |
| CONDUCTOR QUANTITY | 7 |
| STRAND AWG SIZE PER CONDUCTOR | 28 ALL CONDUCTORS |
| TERMINAL COMMERCIAL AND GOVERNMENT ENTITY CODE | 10001 BOTH ENDS ALL CONDUCTORS |
| TERMINAL COMMERCIAL AND GOVERNMENT ENTITY CODE | 10001 FIRST END ALL CONDUCTORS |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-W-16878 MIL SPEC SINGLE MATERIAL RESPONSE FIRST POSITION PRIMARY INSULATION ALL CONDUCTORS |
No substitute or cross-reference records for this part.