PartsTable
Technical Data Sheet
PartsTable / MRO / 15125
15125 ✓ Verified by PartsTable
Clementoni · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: FIBER AND RUBBER BODY, nut_style: HEXAGON, cone_width: 0.8125 INCHES NOMINAL IN, nut_height: 0.325 INCHES NOMINAL IN, point_type: CONVENTIONAL, body_length: 0.475 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3161, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 15125
NSN: 3110-00-100-3161
FSC: 3110
CAGE: 0LTL1 — NTN BEARING CORPORATION OF AMERICA (USA)
SPECIFICATIONS
materialFIBER AND RUBBER BODY
nut_styleHEXAGON
cone_width0.8125 INCHES NOMINAL IN
nut_height0.325 INCHES NOMINAL IN
point_typeCONVENTIONAL
body_length0.475 INCHES NOMINAL IN
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length4.375 INCHES NOMINAL IN
thread_class2B
bore_diameter1.2500 INCHES NOMINAL IN
rating_methodELECTRICAL SINGLE COMPONENT SINGLE WINDING
NSN3110-00-100-3161
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 15125 · Clementoni ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE WIDTH: 0.8125 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
BORE DIAMETER: 1.2500 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CONE WIDTH0.8125 INCHES NOMINAL IN
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
BORE DIAMETER1.2500 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
143116Interchangeable
interchangeable cross-reference
interchangeable
AA59649-092Interchangeable
interchangeable cross-reference
interchangeable
3110000820444Interchangeable
interchangeable cross-reference
interchangeable
120 25/64Interchangeable
interchangeable cross-reference
interchangeable
R51Interchangeable
interchangeable cross-reference
interchangeable
MS17076-18Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 15125?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15125?
15125 is a RESISTOR,VARIABLE,WIRE WOUND,NON manufactured by Clementoni. It is classified as a MRO (MRO_GENERAL).
What parts can replace 15125?
There are 17 known substitutes for 15125: 143116, AA59649-092, 3110000820444 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 15125?
15125 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3161. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15125

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026