PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1511A
1511A ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The YOKE,UNIVERSAL JOINT,VEHICULAR is a the manufacturer industrial component. Key specifications include end_item_identification: OILY WATER SEPERATOR W/SAREX; 4330-01-469-7289, general_characteristics_item_description: 2ND STAGE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-8120, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1511A
NSN: 3110-00-156-8120
FSC: 3110
CAGE: 97578 — TIMKEN GEARS & SERVICES INC. DBA PHILADELPHIA GEAR DIV WESTERN REGIONAL SERVICE CENTER (USA)
SPECIFICATIONS
end_item_identificationOILY WATER SEPERATOR W/SAREX; 4330-01-469-7289
general_characteristics_item_description2ND STAGE
NSN3110-00-156-8120
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1511A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOAD DIRECTION: ANGULAR
•
MATERIAL: STEEL OUTER RING
•
STYLE DESIGNATOR: DOUBLE ROW BALL, INTERNAL SELF-ALIGNING, TAPERED BORE WITH STRAIGHT BORE ADAPTER, LOCKNUT AND LOCK WASHER
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
BORE DIAMETER: 1.9375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LOAD DIRECTIONANGULAR
MATERIALSTEEL OUTER RING
MATERIALSTEEL INNER RING
STYLE DESIGNATORDOUBLE ROW BALL, INTERNAL SELF-ALIGNING, TAPERED BORE WITH STRAIGHT BORE ADAPTER, LOCKNUT AND LOCK WASHER
MATERIALSTEEL BALL
INTERNAL FIT-UP DESIGNATIONSTANDARD
OVERALL WIDTH21.0 MILLIMETERS NOMINAL MM
BORE DIAMETER1.9375 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
403Interchangeable
interchangeable cross-reference
interchangeable
5164293Interchangeable
interchangeable cross-reference
interchangeable
V661Interchangeable
interchangeable cross-reference
interchangeable
1511AInterchangeable
interchangeable cross-reference
interchangeable
2-2-329Interchangeable
interchangeable cross-reference
interchangeable
K2-2-329Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1511A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1511A?
1511A is a YOKE,UNIVERSAL JOINT,VEHICULAR.
What parts can replace 1511A?
There are 15 known substitutes for 1511A: 403, 5164293, V661 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1511A?
1511A is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-8120. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1511A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026