The BRACKET,ANGLE is a 3M industrial component. Key specifications include material: ALUMINUM ALLOY 6063, first_leg_style: SQUARE, first_leg_width: 0.874 INCHES MINIMUM AND 0.877 INCHES MAXIMUM IN, second_leg_style: CORNER RADIUS, second_leg_width: 0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN, surface_treatment: LACQUER. This part is cataloged in the U.S.
Government catalog under NSN 5340-00-071-4359, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
1511113
NSN:5340-00-071-4359 FSC:5340 — Hardware, Commercial CAGE:56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
material
ALUMINUM ALLOY 6063
first_leg_style
SQUARE
first_leg_width
0.874 INCHES MINIMUM AND 0.877 INCHES MAXIMUM IN
second_leg_style
CORNER RADIUS
second_leg_width
0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN
surface_treatment
LACQUER
second_leg_end_radius
0.186 INCHES MINIMUM AND 0.189 INCHES MAXIMUM IN
first_leg_hole_diameter
0.185 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
second_leg_hole_diameter
0.164 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
first_leg_hole_arrangement_style
TWO HOLES
second_leg_hole_arrangement_style
TWO HOLES
material_document_and_classification
QQ-A-274 MIL SPEC SINGLE MATERIAL RESPONSE
NSN
5340-00-071-4359
COMPONENT DIAGRAM
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.185 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.164 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: -69563 MFR REF SINGLE TREATMENT RESPONSE
•
SECOND LEG WIDTH: 0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: TWO HOLES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH
0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER
0.185 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
SECOND LEG RELATIONSHIP TO FIRST LEG
NOT IDENTICAL
SECOND LEG HOLE DIAMETER
0.164 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
-69563 MFR REF SINGLE TREATMENT RESPONSE
SECOND LEG WIDTH
0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLE
TWO HOLES
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH
0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
FIRST LEG STYLE
SQUARE
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-A-274 MIL SPEC SINGLE MATERIAL RESPONSE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1511113?
1511113 is a BRACKET,ANGLE manufactured by 3M.
What is the NSN for 1511113?
1511113 is cataloged in the U.S. Government catalog under NSN 5340-00-071-4359. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.