PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1511-6
1511-6 ✓ Verified by PartsTable
Clementoni · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include length: 0.188 INCHES NOMINAL SQUARE END IN, material: STEEL OVERALL, thickness: 0.375 INCHES NOMINAL IN, cone_width: 0.8125 INCHES NOMINAL IN, point_type: CONVENTIONAL, body_length: 1.562 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3157, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1511-6
NSN: 3110-00-100-3157
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
length0.188 INCHES NOMINAL SQUARE END IN
materialSTEEL OVERALL
thickness0.375 INCHES NOMINAL IN
cone_width0.8125 INCHES NOMINAL IN
point_typeCONVENTIONAL
body_length1.562 INCHES NOMINAL IN
bore_length0.750 INCHES NOMINAL IN
design_typeSTRAIGHT
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length3.750 INCHES NOMINAL IN
bore_diameter0.5625 INCHES NOMINAL IN
NSN3110-00-100-3157
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1511-6 · Clementoni ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
BORE DIAMETER: 1.1855 INCHES NOMINAL IN
•
CONE WIDTH: 0.8125 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.0312 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER1.1855 INCHES NOMINAL IN
CONE WIDTH0.8125 INCHES NOMINAL IN
CONE CORNER RADIUS0.0312 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
31932Interchangeable
interchangeable cross-reference
interchangeable
361-60094Interchangeable
interchangeable cross-reference
interchangeable
W8119088PC14Interchangeable
interchangeable cross-reference
interchangeable
C12A3Interchangeable
interchangeable cross-reference
interchangeable
08014Interchangeable
interchangeable cross-reference
interchangeable
10005Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1511-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1511-6?
1511-6 is a CONNECTOR,RECEPTACLE,ELECTRICAL manufactured by Clementoni.
What parts can replace 1511-6?
There are 18 known substitutes for 1511-6: 31932, 361-60094, W8119088PC14 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1511-6?
1511-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3157. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1511-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026