PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 151-38028
151-38028 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, overall_width: 0.619 INCHES NOMINAL IN, aperture_width: 0.419 INCHES NOMINAL IN, overall_length: 0.675 INCHES NOMINAL IN, aperture_length: 0.475 INCHES NOMINAL IN, hardness_rating: 60.0 SHORE DUROMETER A NOMINAL OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-150-1767, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
151-38028
NSN: 5330-00-150-1767
FSC: 5330
CAGE: 64294 — DANFOSS FLUID POWER INC RACINE OPN (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
overall_width0.619 INCHES NOMINAL IN
aperture_width0.419 INCHES NOMINAL IN
overall_length0.675 INCHES NOMINAL IN
aperture_length0.475 INCHES NOMINAL IN
hardness_rating60.0 SHORE DUROMETER A NOMINAL OVERALL
inside_corner_radius0.062 INCHES NOMINAL IN
outside_corner_radius0.020 INCHES NOMINAL IN
cross-sectional_thickness0.078 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-150-1767
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 151-38028 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CROSS-SECTIONAL THICKNESS: 0.078 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
•
OUTSIDE CORNER RADIUS: 0.020 INCHES NOMINAL IN
•
APERTURE WIDTH: 0.419 INCHES NOMINAL IN
•
APERTURE LENGTH: 0.475 INCHES NOMINAL IN
•
HARDNESS RATING: 60.0 SHORE DUROMETER A NOMINAL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.619 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS0.078 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
OVERALL LENGTH0.675 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.020 INCHES NOMINAL IN
APERTURE WIDTH0.419 INCHES NOMINAL IN
APERTURE LENGTH0.475 INCHES NOMINAL IN
HARDNESS RATING60.0 SHORE DUROMETER A NOMINAL OVERALL
MATERIALRUBBER SYNTHETIC OVERALL
INSIDE CORNER RADIUS0.062 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
09-5948Interchangeable
interchangeable cross-reference
interchangeable
F600A-369Interchangeable
interchangeable cross-reference
interchangeable
38028Interchangeable
interchangeable cross-reference
interchangeable
861040-1Interchangeable
interchangeable cross-reference
interchangeable
14801IN PC NO 70Interchangeable
interchangeable cross-reference
interchangeable
N38028Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 151-38028?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 151-38028?
151-38028 is a GASKET.
What parts can replace 151-38028?
There are 7 known substitutes for 151-38028: 09-5948, F600A-369, 38028 and 4 more. Substitute compatibility should be verified for your specific system.
Is 151-38028 still available?
151-38028 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 151-38028

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026