PartsTable
Technical Data Sheet
PartsTable / MRO / 151-38
151-38 ✓ Verified by PartsTable
Clementoni · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The GOVERNOR,GASOLINE ENGINE is a Clementoni industrial component. Key specifications include material: STEEL CORROSION RESISTING BLADE, bore_shape: STRAIGHT, drive_type: PULLEY, temp_rating: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF, blade_length: 25.0 MILLIMETERS NOMINAL MM, corner_shape: SQUARE ALL CORNERS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-245-8814, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 151-38
NSN: 3110-00-245-8814
FSC: 3110
CAGE: 45320 — PACCAR GOVERNMENT GROUP CO YARROW BAY OFFICE PK (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING BLADE
quantity6
bore_shapeSTRAIGHT
drive_typePULLEY
temp_rating-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
blade_length25.0 MILLIMETERS NOMINAL MM
corner_shapeSQUARE ALL CORNERS
specific_useDW ONAN ENGINE
bore_diameter60.00 MILLIMETERS NOMINAL MM
governor_typeCENTRIFUGAL
mounting_typeFLANGE
overall_width31.00 MILLIMETERS NOMINAL MM
NSN3110-00-245-8814
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 151-38 · Clementoni ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
BORE SHAPE: STRAIGHT
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: SINGLE ROW, ONE-DIRECTION LOCATING, ONE LIP INNER RING, TWO LIP OUTER RING, SEPARABLE
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 130.00 MILLIMETERS NOMINAL MM
•
BORE DIAMETER: 60.00 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL FIT-UP DESIGNATIONSTANDARD
BORE SHAPESTRAIGHT
MATERIALSTEEL OVERALL
STYLE DESIGNATORSINGLE ROW, ONE-DIRECTION LOCATING, ONE LIP INNER RING, TWO LIP OUTER RING, SEPARABLE
SURFACE FINISHGROUND
OVERALL OUTSIDE DIAMETER130.00 MILLIMETERS NOMINAL MM
BORE DIAMETER60.00 MILLIMETERS NOMINAL MM
OVERALL WIDTH31.00 MILLIMETERS NOMINAL MM
STANDARD TOLERANCE DESIGNATIONRBEC NO.1
RETAINER FABRICATION METHODPRESSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
15138Interchangeable
interchangeable cross-reference
interchangeable
318-16Interchangeable
interchangeable cross-reference
interchangeable
P84Interchangeable
interchangeable cross-reference
interchangeable
GC2803Interchangeable
interchangeable cross-reference
interchangeable
7418454Interchangeable
interchangeable cross-reference
interchangeable
12L2FFInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 151-38?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 151-38?
151-38 is a GOVERNOR,GASOLINE ENGINE manufactured by Clementoni. It is classified as a MRO (MRO_GENERAL).
What parts can replace 151-38?
There are 13 known substitutes for 151-38: 15138, 318-16, P84 and 10 more. Substitute compatibility should be verified for your specific system.
Is 151-38 still available?
151-38 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 151-38

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026