PartsTable
Technical Data Sheet
Download PDF

150PHL-4 — MOUNT,RESILIENT,UTILITY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

150PHL-4: MOUNT,RESILIENT,UTILITY.

The MOUNT,RESILIENT,UTILITY is a the manufacturer industrial component. Key specifications include height: 1.110 INCHES MINIMUM AND 1.130 INCHES MAXIMUM IN, material: STEEL HOLDER, load_rating: 4.0 POUNDS MAXIMUM LBS, flange_width: 2.370 INCHES MINIMUM AND 2.390 INCHES MAXIMUM IN, flange_length: 2.370 INCHES MINIMUM AND 2.390 INCHES MAXIMUM IN, inside_diameter: 0.252 INCHES MINIMUM AND 0.262 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-328-1540, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
150PHL-4
NSN: 5340-01-328-1540
FSC: 5340 — Hardware, Commercial
CAGE: 76005 — LORD CORPORATION DBA LORD CORP (USA)
SPECIFICATIONS
height1.110 INCHES MINIMUM AND 1.130 INCHES MAXIMUM IN
materialSTEEL HOLDER
load_rating4.0 POUNDS MAXIMUM LBS
flange_width2.370 INCHES MINIMUM AND 2.390 INCHES MAXIMUM IN
flange_length2.370 INCHES MINIMUM AND 2.390 INCHES MAXIMUM IN
inside_diameter0.252 INCHES MINIMUM AND 0.262 INCHES MAXIMUM IN
flange_thickness0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
style_designatorROUND W/BUSHING FOUR-HOLE FLANGE
surface_treatmentCADMIUM HOLDER
specification/standard_data76005-150PHL-4 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
flange_mounting_hole_diameter0.191 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
distance_between_mounting_hole_centers1.933 INCHES MINIMUM AND 1.943 INCHES MAXIMUM IN
NSN5340-01-328-1540
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 150PHL-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE MOUNTING HOLE DIAMETER: 0.191 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
•
LOAD RATING: 4.0 POUNDS MAXIMUM LBS
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 1.933 INCHES MINIMUM AND 1.943 INCHES MAXIMUM IN
•
FLANGE THICKNESS: 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: ROUND W/BUSHING FOUR-HOLE FLANGE
•
FLANGE LENGTH: 2.370 INCHES MINIMUM AND 2.390 INCHES MAXIMUM IN
•
SPECIFICATION/STANDARD DATA: 76005-150PHL-4 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
•
SHORTEST DISTANCE BETWEEN MOUNTING HOLE CENTERS: 1.933 INCHES MINIMUM AND 1.943 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FLANGE MOUNTING HOLE DIAMETER0.191 INCHES MINIMUM AND 0.201 INCHES MAXIMUM IN
LOAD RATING4.0 POUNDS MAXIMUM LBS
DISTANCE BETWEEN MOUNTING HOLE CENTERS1.933 INCHES MINIMUM AND 1.943 INCHES MAXIMUM IN
FLANGE THICKNESS0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
STYLE DESIGNATORROUND W/BUSHING FOUR-HOLE FLANGE
FLANGE LENGTH2.370 INCHES MINIMUM AND 2.390 INCHES MAXIMUM IN
SPECIFICATION/STANDARD DATA76005-150PHL-4 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
SHORTEST DISTANCE BETWEEN MOUNTING HOLE CENTERS1.933 INCHES MINIMUM AND 1.943 INCHES MAXIMUM IN
INSIDE DIAMETER0.252 INCHES MINIMUM AND 0.262 INCHES MAXIMUM IN
HEIGHT1.110 INCHES MINIMUM AND 1.130 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 150PHL-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 150PHL-4?
150PHL-4 is a MOUNT,RESILIENT,UTILITY.
What is the NSN for 150PHL-4?
150PHL-4 is cataloged in the U.S. Government catalog under NSN 5340-01-328-1540. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 150PHL-4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.