PartsTable
Technical Data Sheet
PartsTable / MRO / 150980
150980 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The 150980 is a the manufacturer industrial component. Key specifications include fsc_application_data: TELETYPE AND FACSIMILE EQUIPMENT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-015-0980, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 150980
NSN: 5305-00-015-0980
FSC: 5305
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
fsc_application_dataTELETYPE AND FACSIMILE EQUIPMENT
general_characteristics_item_descriptionSTEEL; 3.094 IN. LONG; 1.000 IN. WIDE; 0.042 IN. THICK; TWO 0.162 IN. DIA HOLES; DISTANCE CENTER TO CENTER BETWEEN HOLES 2.719 IN. IN
NSN5305-00-015-0980
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 150980 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 71C FIGURE
•
FASTENER LENGTH: 1.500 INCHES NOMINAL IN
•
NONMACHINE THREAD STYLE: WOOD SCREW (TYPE WD)
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESMATERIAL BRASS
HEAD HEIGHT0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
NONMACHINE NOMINAL THREAD DIAMETER0.190 INCHES IN
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 71C FIGURE
FASTENER LENGTH1.500 INCHES NOMINAL IN
NONMACHINE THREAD STYLEWOOD SCREW (TYPE WD)
MATERIALCOPPER ALLOY OVERALL
HEAD DIAMETER0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
HEAD STYLEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
MILS971Interchangeable
interchangeable cross-reference
interchangeable
C4-3-4Interchangeable
interchangeable cross-reference
interchangeable
MILS971TYPECInterchangeable
interchangeable cross-reference
interchangeable
FF-S-111 TY1ST2CInterchangeable
interchangeable cross-reference
interchangeable
149367Interchangeable
interchangeable cross-reference
interchangeable
FF-S-111Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 150980?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 150980?
150980 is a 150980. It is classified as a MRO (MRO_GENERAL).
What parts can replace 150980?
There are 21 known substitutes for 150980: MILS971, C4-3-4, MILS971TYPEC and 18 more. Substitute compatibility should be verified for your specific system.
Is 150980 still available?
150980 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 150980

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026