PartsTable
Technical Data Sheet
PartsTable / MRO / 150976

150976 — Technical Data Sheet

✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The TELETYPEWRITER SUBASSEMBLY is a the manufacturer industrial component. Key specifications include special_features: PLATE 1; BRACKET 1. This part is cataloged in the Federal Logistics Information System under NSN 5305-00-015-0976, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 150976
NSN: 5305-00-015-0976
FSC: 5305
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
special_featuresPLATE 1; BRACKET 1
NSN5305-00-015-0976
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 150976 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)
•
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
MATERIAL: COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OVERALL
•
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
•
HEAD STYLE: PAN
•
FASTENER LENGTH: 1.203 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
NONMACHINE NOMINAL THREAD DIAMETER0.190 INCHES IN
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
HEAD DIAMETER0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
MATERIALCOPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OVERALL
HEAD HEIGHT0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
HEAD STYLEPAN
FASTENER LENGTH1.203 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
MILS971InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
C4-3-4InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MILS971TYPECInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
B18.6.1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MS35493-266InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
ANSI B18.6.1InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 150976?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 150976?
150976 is a TELETYPEWRITER SUBASSEMBLY. It is classified as a MRO (MRO_GENERAL).
What parts can replace 150976?
There are 8 known substitutes for 150976: MILS971, C4-3-4, MILS971TYPEC and 5 more. Substitute compatibility should be verified for your specific system.
Is 150976 still available?
150976 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 150976

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026