PartsTable
Technical Data Sheet
Download PDF

1506679G1 — LATCH,MORTISE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1506679G1: LATCH,MORTISE.

The LATCH,MORTISE is a the manufacturer industrial component. Key specifications include width: 0.560 INCHES NOMINAL IN, height: 0.125 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, length: 2.270 INCHES NOMINAL IN, material: UNABLE TO DECODE, face_shape: BEVELED, action_type: SPRING. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-294-0145, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1506679G1
NSN: 5340-01-294-0145
FSC: 5340 — Hardware, Commercial
CAGE: 31550 — L3HARRIS TECHNOLOGIES, INC. DBA HARRIS CORPORATION (USA)
SPECIFICATIONS
width0.560 INCHES NOMINAL IN
height0.125 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
length2.270 INCHES NOMINAL IN
materialUNABLE TO DECODE
face_shapeBEVELED
action_typeSPRING
special_featuresCASE SHAPE:RECTANGULAR;FACE WIDTH:0.560 IN.;FACE HEIGHT:0.015 IN
features_providedSCREW
surface_treatmentUNABLE TO DECODE
end_item_identificationAN/FSC-83
operating_mechanism_locationONE SIDE
NSN5340-01-294-0145
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1506679G1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 2.270 INCHES NOMINAL IN
•
FACE SHAPE: BEVELED
•
OPERATING MECHANISM LOCATION: ONE SIDE
•
FEATURES PROVIDED: SCREW
•
ACTION TYPE: SPRING
•
HEIGHT: 0.125 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
SURFACE TREATMENT: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS
LENGTH2.270 INCHES NOMINAL IN
FACE SHAPEBEVELED
OPERATING MECHANISM LOCATIONONE SIDE
FEATURES PROVIDEDSCREW
ACTION TYPESPRING
HEIGHT0.125 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
SPECIAL FEATURESCASE SHAPE:RECTANGULAR;FACE WIDTH:0.560 IN.;FACE HEIGHT:0.015 IN
SURFACE TREATMENTUNABLE TO DECODE
WIDTH0.560 INCHES NOMINAL IN
END ITEM IDENTIFICATIONAN/FSC-83
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1506679G1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1506679G1?
1506679G1 is a LATCH,MORTISE.
What is the NSN for 1506679G1?
1506679G1 is cataloged in the U.S. Government catalog under NSN 5340-01-294-0145. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1506679G1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.