PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 15051-5
15051-5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, inside_diameter: 0.688 INCHES NOMINAL IN, style_designator: CYLINDRICAL, spring_free_length: 2.438 INCHES NOMINAL IN, spring_solid_length: 1.7812 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-033-5115, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
15051-5
NSN: 5330-00-033-5115
FSC: 5330
CAGE: 25980 — GRACO INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
coil_quantity8
inside_diameter0.688 INCHES NOMINAL IN
style_designatorCYLINDRICAL
spring_free_length2.438 INCHES NOMINAL IN
spring_solid_length1.7812 INCHES NOMINAL IN
coil_helix_directionRIGHT-HAND OR LEFT-HAND
spring_free_outside_diameter1.063 INCHES NOMINAL IN
NSN5330-00-033-5115
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 15051-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RIM SURFACE WIDTH: 0.062 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: V
•
CROSS-SECTIONAL HEIGHT: 0.156 INCHES NOMINAL IN
•
MATERIAL: LEATHER OVERALL
•
CENTER HOLE DIAMETER: 0.215 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 0.438 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
RIM SURFACE WIDTH0.062 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEV
CROSS-SECTIONAL HEIGHT0.156 INCHES NOMINAL IN
MATERIALLEATHER OVERALL
CENTER HOLE DIAMETER0.215 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
PERIPHERAL DIAMETER0.438 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
L1206Interchangeable
interchangeable cross-reference
interchangeable
206MInterchangeable
interchangeable cross-reference
interchangeable
B6935Interchangeable
interchangeable cross-reference
interchangeable
3179368PC5Interchangeable
interchangeable cross-reference
interchangeable
15179PC15Interchangeable
interchangeable cross-reference
interchangeable
15053PC5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 15051-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15051-5?
15051-5 is a BEARING,BALL,ANNULAR.
What parts can replace 15051-5?
There are 8 known substitutes for 15051-5: L1206, 206M, B6935 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 15051-5?
15051-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-033-5115. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15051-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026