PartsTable
Technical Data Sheet
Download PDF

15050291 — FANNING STRIP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

15050291: FANNING STRIP.

The FANNING STRIP is a the manufacturer industrial component. Key specifications include material: PLASTIC PHENOLIC BODY, flexibility: RIGID, overall_width: 1.750 INCHES NOMINAL IN, overall_length: 19.000 INCHES NOMINAL IN, mounting_method: SCREW, style_designator: RECTANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-465-6643, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
15050291
NSN: 5330-00-465-6643
NIINs: 004656643, 010190463
FSC: 5330 — Packing and Gasket Materials
CAGE: 97907 — TEREX CORP (USA)
SPECIFICATIONS
materialPLASTIC PHENOLIC BODY
flexibilityRIGID
overall_width1.750 INCHES NOMINAL IN
overall_length19.000 INCHES NOMINAL IN
mounting_methodSCREW
style_designatorRECTANGULAR
peripheral_diameter2.375 INCHES NOMINAL IN
center_hole_diameter1.750 INCHES NOMINAL IN
cross-sectional_height0.480 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
mounting_device_quantity4
cross-sectional_shape_styleU WITH O-RING
conductor_accommodation_quantity32
NSN5330-00-465-6643
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 15050291 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.480 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: U WITH O-RING
•
PERIPHERAL DIAMETER: 2.375 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.750 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.480 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEU WITH O-RING
PERIPHERAL DIAMETER2.375 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.750 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
9005074Reference document
Same NSN cross-reference
Reference document — Secondary reference
31201750-500BSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 15050291?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 15050291?
15050291 is a FANNING STRIP.
What parts can replace 15050291?
There are 2 known substitutes for 15050291: 9005074, 31201750-500B. Substitute compatibility should be verified for your specific system.
What is the NSN for 15050291?
15050291 is cataloged in the U.S. Government catalog under NSN 5330-00-465-6643. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 15050291

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.